Blueprint in Numbers

Cyberboard V2

A cyberpunk-themed STM32 development board featuring Bluetooth 5.1 connectivity and integrated Li-ion/LiPo battery charging support. Now with all the errors fixed from the last design and more sensors including an IMU and a barometer!

BECCA Rocket

Big Engine Certification Completion Attempt . This is an amateur high power rocket being build for my L1 certification launch.

ES_01 E-ink Smartwatch

A 5mm thick smartwatch which achieves its thinness by laying out each of its components in a straight line, in their own modules which can bend around each other to conform to the wearer's wrist. The watch features a main E-ink touch display that consumes very little power, accompanied by two small OLEDs at the top and bottom to show rapidly changing data (Like seconds, heart rate etc.). The watch incorporates an ESP32-S3 microcontroller for main processing and establishing a Bluetooth connection to a smartphone. It also incorporates heart rate sensing, an intelligent inertial measurement unit and a pressure/temperature sensor to provide rough fitness and altitude tracking as well.

Plico

Fully custom split mechanical keyboard. Runs on KMK software, controlling key functions and responsive lighting. Future iterations intend to use ultra low-profile switches and a case redesign to allow the two sides to fold together for portability.

LinuxWood: Reviving an Old Laptop into a Modern Workstation

I’m transforming an old, broken laptop into a modern, flexible workstation powered by Xubuntu Linux. The goal is to recycle its components — screen, motherboard, and storage — into a new, slim all-in-one body that’s both functional and beautiful. I’ll design a custom CAD enclosure to hold the screen and motherboard together, upgrade the HDD to SSD, and create a flexible stand so the setup can act as a portable second monitor or main Linux workstation. It will connect to a wireless keyboard and mouse, giving it a clean, cable-free setup perfect for my workbench or desk. This project is all about upcycling old tech, learning CAD and hardware design, and building something practical and sustainable.

clementine clock

an orange/mandarin-themed clock to set timers & alarms for my room LCD display for time, buttons, speakers, rotary encoder, 3 AA batteries, and 2-part 3D-printed spherical clementine case

AngstromIO, a devboard the size of a USB-C connector (+ the programmer, & another CH32v003 devboard)

AngstromIO is one of the smallest devboards out there, barely longer than a USB-C connector, based on the ATtiny1616 MCU (16kB flash). It comes with 2 Addressable RGB LEDs, and 2 GPIOs as well as I2C lines are broken out. I made a dual CH340 programming board too, both for UPDI programming and debugging (one way Serial Communication). The third PCB is a cost effective, USB-C devboard based on the CH32v003 (QFN) with a small 5x4 charlieplexed LED matrix.

KillerSplit

Split keyboard designed during #Grounded built during #Blueprint. An ergonomic, wireless, split, low-profile keyboard. This is a fusion between a Corne and a ZMK Voyager. It has a 6-column layout like the Corne, but the thumb buttons are placed like a Voyager. I got the inspiration and motivation after looking at so many cool designs in r/ErgoMechKeyboards so wanted to make one of my own.

Minty FPGA

ECP5 FPGA based devboard with DDR3 RAM + other features!

split keeb!

folowing the guide for the split keeb for my first blueprint project, but adding a built in usb hub and haptic feedback

3lb Combat Robot

A FULLY-3D Printed (mostly lol) beetleweight combat robot

The Surevival

Yooo here!!! I am Rishaan Sharma, a 14 year old Indian. I am making this project, 'The Surevival' as a survival tool. It would have functions like Survival guide, GPS, whether reports, etc. I'll be making this on KiCad, and yeah I'm a beginner! It's MCU will be ESP32-S3FN8. I hope it's a tier 1! It's a very interesting project, so please do check out for the Journal! Well I'm having $105 as the required grant, but I'll return what are left!