To Reviewer ,

I don't need "Grants" For this project rather i will accept tickets instead

Thanks a lot for all of the reviewers going through my project i am really greatfull and am expecting this projects gets approved soon

I Have Made Inivs_Pad In IRL outside of PC Files !!

I Have made it guys

• I have used copper wires solid core ones for traces
• And created a demo for the Project
• I will now publish demo too soon
• Also Made the full repo + Github Readme documentations

So Here Is the circuit board image

Day - 7

Day 7 (2.6 Hours)

Day 7 , This day i figured out how to map Arduino Nano serial inputs to PC

Since , Arduino nano do not support HID inputs , i made my own python code for this that took serial out put from the Arduino NANO and changed it to actual keyboard inputs

Images Of Progress

Day-6

Day 6 (2.4 hours)

Day 6 , I Made Arduino code for the NANO and made it work

I Wrote the code to detect the Vibrations on desk and convert into custom serial commands that my pc can receive and convert to actual keyboard inputs

Images Of the work

Day-5

Day 5 (3.5 Hours)

Day 5 , Made the enclosure

I learnt how to use Free cad to create Parts || enclosure's and made a enlosure with a usb port that fit my components , but i made no top covering since i am planning to use clear aclyiric for top for a cooler look here is the image of enclosure

Image Of Enclosure

Day 4

Day 4 (4 Hours )

Day 4 , Making of 3d component PCB model

I learnt how to Import My PCB as a STEP file and how to use FREE CAD & Grab cad to import models of my components , then i actually made the 3d model of my PCB that will go inside the enclosure along side components

Image Of 3d PCB

Day-3

Day 3 ( 3 Hours )

Day 3 , Making of PCB

I spent day 3 researching and learning how to properly trace and make PCB's and stuff
Watched some YT videos and learnt some stuff off of Hack club's Hackapad guide
Finally i imported all of the Footprint from the internet for the components and routed the PCB

PCB Image

Day -2

Day 2 (3.1 hours)

Day 2 , Schematic and R&D

I researched on how to connect the Mpu6050 without much noise and how to make a schematic and stuff for blue print , after watching yt classes on Keycad Schematics and how to import custom libraries i made my schematic complete it is quite simple and easy to understand .. Most importantly dirt cheap

Schematic Image

ReJournaling...Acc. to Reviewer Request

Main Objective was to make this project affordable for students

LMAO, since i am first one to make such a thingy

Day 1 (2.5 Hours )

Day 1 , was figuring out what the problem was and how to solve it

The Problem was that while watching lectures i keep my keyboard away to save space on my Desk
To keep my books , but some times i need to take my keyboard to play the video back 10 seconds or just to play or pause the video .. after watching too many lectures i felt stupid doing this
so i had to come up with a solution , so i looked in to my drawer saw a Arduino Nano and a Mpu6050 accelerometer so i thought i will make something with this that can solve my problem

So, I started brain storming and figured i could use the accelrometer to catch light taps on my desk and convert them to keyboard inputs