To Reviewer ,

No please ,Grant me tickets the only reason i am not willing to spend my time actually building this is because of my upcoming board exams and model exams i cannot spend more of my time on blueprint please please gimme the tickets for this project pwease ,

I don't really want to build this due to lack of time & Oncoming Exams i am in +2 Please understand my situation

please gimme tickets

To Reviewer , please look under this image to see changes

I dont need any Grant's For this project and i have requested none , rather i will accept tickets like a side quest i need tickets to buy a hotplate and a soldering iron and essentials for my hack pad this efforts are for it

Really Greatful and thanks for the reviewers effort's i am expecting my project gets approved soon

Wrote the code Acc to reviewer request with my schematic's

Wrote a legible code anyone can modify and manipulate with clear documentation inside for the community

this is an image of what i was working on from vs code

To Reviewer ,

I dont need any Grant's For this project and i have requested none , rather i will accept tickets like a side quest i need tickets to buy a hotplate and a soldering iron and essentials for my hack pad this efforts are for it

Really Greatful and thanks for the reviewers effort's i am expecting my project gets approved soon

Day-5 (4.1 Hours)

Day-5 Made an enclosure for this with precision

• Made the 3d model for the enclosure
• Added a Cutout on top for the buttons
• Added a Cutout for the type c port with enough clearance for modern wires

Image Of Enclosure

Day-4 (1.3 hours )

Day 4 was all about problems faced during 3d modeling

• I figured i could not mount the pcb anywhere since there were no mounting holes
• So after thinking a lot and figuring there aint no other way i added mounting holes
• Yea Thats pretty much it

Images Of New Modeified PCB

Day-3 (5.1 Hours )

Ahh Day-3 it was all about 3d Models and Cosmetics

• I made the 3d Model of PCB and PCB with components
• I made sure that the components matched ones on PCB
• I also made sure that the 3d Models give a clear picture to the user on how and where to plug in all the components
• I Have Collected .STEP models for all components (MCU,MPU6050,Switches)
• I have placed every component on the PCB based on footprint locations
• I Have used the 3d Models from GRAB CAD
• I Have used FREE_CAD Since i am on Debian

Problems faced

• FREE CAD OFTEN CRASHES
• FOOT PRINT MISMATCHES
• HAD difficulty finding correct STEP/3D models for some of the components i chose.
• The components were not aligning correctly with PCB footprints IDK Why tho ?
• ANY WAYS FIXED IT ALL !!

Here's Image of 3d Models

Day-2 (4.7 hours)

Day-2 was all about PCB's

• I made the PCB in KI-CAD
• I found all the foot print from random internet files and modified some

Problems arised

• The Footprints didnt match with the schematic symbols so i needed to modify those
• There were many DRC errors had to solve em
• There were many Netlist Errors that caused the Foot Prints to not connect Properly

Here's the image of pCB's

Day-1 (2.6 hours)

Day 1 was all about planning and sketching

• I made the Schematics in KI-CAD
• I have decided to use the XIAO RP-2040 Micro controller
• I have also decided to use MPU6050 for the Accelormeter since i only need to route 4 Pins from it
• I also decided to use 4 buttons for default options such as top down front back etc...

Here's the image of the sCHEMATICS