Created Final Repo Polished the Projects and added BOM.csv

So the project is done i created the BOM.csv (2 Actually one for international links amazon.com etc and other local shipping) this project can be done in 8-9$ margin easily here is the drive link for all the assetshttps://drive.google.com/drive/folders/10nQiTgZ9VRWo2Ry4HvKti-WEHZzETjhn?usp=drive_link and ig thats it

Completed the Game Emulator with buzzers lights and buttons!

So wrote the code first (Updated on Github) it is a esp game emualator thingy with 4 games in the menu SNAKE PONG CAR RACE and DINO pretty simple i also added the eyes animation when it boots up with a hello message and a loading animation for the menu Code more code

the connections are as follows
OLED Display (I2C)

VCC → 3.3V

GND → GND

SDA → GPIO 21

SCL → GPIO 22

Buttons (to GND when pressed)

UP → GPIO 32

DOWN → GPIO 33

LEFT → GPIO 25

RIGHT → GPIO 26

SELECT → GPIO 27

Buzzer

(+) → GPIO 18

(-) → GND

Green LED (with 220Ω resistor!)

(+) → GPIO 19

(-) → 220Ω → GND

buzzer and light

Lightmenu and buzzer

I'll update everything on GitHub tmrw ig

Created a simple car lane changer game with buttons!

So i added two buttons the display and the esp 32 together and coded it to be left and right (fixed the ground to the breadboard and use male to female to connect it to the esp32) and then connected the display with the vcc gnd sda and scl to the esp32 did the connections and um yeah wrote some code added a stationary car as us which we could control we can change lanes using left and right buttons (maybe ill add a buzzer) and the non stationary objects (which are just rectangles) come with a speed we have to avodi them and score goes up a gameover screen and it loops!

Connected the display to the esp32

So I'm really new to hardware and I've a 0.96 inch display which i can use wtih the ESP32 i tried it before but seems like the pin were not present </3 so i soldered some copper wire to it and surprisingly it works with the female jumper wires! printed hello world on it