Vertical Phone Stand
This is something my friend has been wanting. its for holding the phone still while he is making stop motion animations.
Created by
Blake Mangum
Tier 5
7 views
0 followers
alexren ⚡🚀
requested changes for Vertical Phone Stand ago
Hey - you should move this back to design review! This is not physically built so it should not be submitted.
Tier: 5
CAN ⚡🚀
submitted Vertical Phone Stand for ship review ago
Blake Mangum
submitted Vertical Phone Stand for ship review ago
Blake Mangum
added to the journal ago
polished again and finished the git hub repo
i polished it a tiny bit more and made sure that everything should (Very big Should) fit together. the phone holder currently was modeled for an iPhone 16 but i will be adding better compatibility later. it was annoying because i needed to make it all stls and step but i dont know how to expoet single bodies as a step file in fusion.
NotARoomba 🚀
requested changes for Vertical Phone Stand ago
Please add in a Github repo with a readme about the project and add in the 3D files / screenshots. Other than that it looks great!
Blake Mangum
added to the journal ago
finished the holder
ive finished the holder and now my friend needs to print it off. i finished the phone holer part and just polished everything up some more. hopefully it works for what he needs. here'
s the final product
Blake Mangum
submitted Vertical Phone Stand for ship review ago
Blake Mangum
added to the journal ago
I made a final part for the c clamp now the holder.
i polished the design more and finished the c clamp but i still have to design the top part that will hold the phone for the stop motion it will for now be attached with 3d printed screws but ill hopefully change that later.
Blake Mangum
added to the journal ago
made a rough draft
i figured out that it would be easiest if i were to make it look like a C clamp because that wouldl be the easiest. also i'm implementing a ball joint on the screw so it can adjust to any surface. 
Blake Mangum
added to the journal ago
figuring out how i should make it (posing arm or desk mount)
im thinking that ill make this with just a desk mount like a clamp for now, and Ill make it able to pose and change later when i cand figure out the best way to do that later so I'm thinking something like this.
that is the main clamp ill figure out the phone mount in a little.
Blake Mangum
started Vertical Phone Stand ago
12/3/2025 3 PM - figuring out how i should make it (posing arm or desk mount)
im thinking that ill make this with just a desk mount like a clamp for now, and Ill make it able to pose and change later when i cand figure out the best way to do that later so I'm thinking something like this.
that is the main clamp ill figure out the phone mount in a little.
12/3/2025 4 PM - made a rough draft
i figured out that it would be easiest if i were to make it look like a C clamp because that wouldl be the easiest. also i'm implementing a ball joint on the screw so it can adjust to any surface.
12/3/2025 8 PM - I made a final part for the c clamp now the holder.
i polished the design more and finished the c clamp but i still have to design the top part that will hold the phone for the stop motion it will for now be attached with 3d printed screws but ill hopefully change that later.
12/4/2025 - finished the holder
ive finished the holder and now my friend needs to print it off. i finished the phone holer part and just polished everything up some more. hopefully it works for what he needs. here'
s the final product
12/5/2025 - polished again and finished the git hub repo
i polished it a tiny bit more and made sure that everything should (Very big Should) fit together. the phone holder currently was modeled for an iPhone 16 but i will be adding better compatibility later. it was annoying because i needed to make it all stls and step but i dont know how to expoet single bodies as a step file in fusion.