Tuxedo the Phone Stand
Making a Phone stand for my nightstand :D!
Created by
Voidless
Tier 5
83 views
0 followers
CAN ⚡🚀
approved Tuxedo the Phone Stand ago
Tickets awarded: 12 tickets
Tier: 5
CAN ⚡🚀
submitted Tuxedo the Phone Stand for ship review ago
Voidless
submitted Tuxedo the Phone Stand for ship review ago
Voidless
added to the journal ago
Updated GitHub to get ready for submission
I changed the color of the design to teal, and exported the .step files.
I updated the GitHub repository with my CAD files and README.md so that I can submit my design.
Voidless
added to the journal ago
Added supports and back decoration
I added a base as seen in the pictures. First, I made them triangular supports, but they looked kinda ugly. I decided on a circular base to look better and more polished.
I then tried some patterns for the back of the stand, to make it look cooler. I experimented with different fill patterns, like voronoi and triangle. However, I couldn't figure out how to make the patterns extrude properly. I decided to scrap all of it.
I still wanted to add something, so since my phone stand is named tuxedo, I decided to put a drawing outline of Tux, the Linux Penguin. I can put a printed picture of the Linux Penguin on the inside so that I can see the rest of the design.
To finish the design, I added the name of the phone stand to the design.
Voidless
added to the journal ago
CADed Base for Phone
I decided to make a phone stand with a space for Lightning Charging for my IPhone 14.
I used my caliper to measure the dimensions of the lightning charger so that it fits in the case snugly.
I then added some padding so that when I extrude, there is space for the phone to rest against and to not fall out. There is also a backing to it so that the phone can rest on it up to the camera part.
Next, I am planning to add a voronoi pattern to the back to minimize print material and to add supports so it doesn't topple over.
Voidless
started Tuxedo the Phone Stand ago
12/3/2025 9 PM - CADed Base for Phone
I decided to make a phone stand with a space for Lightning Charging for my IPhone 14.
I used my caliper to measure the dimensions of the lightning charger so that it fits in the case snugly.
I then added some padding so that when I extrude, there is space for the phone to rest against and to not fall out. There is also a backing to it so that the phone can rest on it up to the camera part.
Next, I am planning to add a voronoi pattern to the back to minimize print material and to add supports so it doesn't topple over.
12/3/2025 11:05 PM - Added supports and back decoration
I added a base as seen in the pictures. First, I made them triangular supports, but they looked kinda ugly. I decided on a circular base to look better and more polished.
I then tried some patterns for the back of the stand, to make it look cooler. I experimented with different fill patterns, like voronoi and triangle. However, I couldn't figure out how to make the patterns extrude properly. I decided to scrap all of it.
I still wanted to add something, so since my phone stand is named tuxedo, I decided to put a drawing outline of Tux, the Linux Penguin. I can put a printed picture of the Linux Penguin on the inside so that I can see the rest of the design.
To finish the design, I added the name of the phone stand to the design.
12/3/2025 11:06 PM - Updated GitHub to get ready for submission
I changed the color of the design to teal, and exported the .step files.
I updated the GitHub repository with my CAD files and README.md so that I can submit my design.