Finished the PCB

I finished all the errors and added this very cool image to the silkscreen:

I think I will start with ordering this one to verify everything works, then I'll add support for batteries, use a better LDR (up to 1A instead of 250mAh) and add a buildin micro sd card slot

I also tried to actually ship the PCB, but the flash memory is out of stock :(

PCB

Started making the PCB! I think it's almost finished, I just have to fix 20 more weird errors. It looks like they are connection errors, but I don't understand when they mean. I hope google will help me, but it's actually quite fun to discover and fix them

Finished the schematic

The schematic design is done (I think). I really learned a lot about hardware design already, but it's still veeery complicated to understand. I was thinking about turning this devboard into the controller for either a drone or a TVC controlled model rocket.

Started the PCB!

I started making the PCB of the devboard based on the guide, I think it's +- 1/4 completed. I already worked with KiCad before (once), but I learned a LOT from this tutorial! I don't really know what unique features I should add when I'm finished ...