Flight Controller
A flight controller for an FPV drone.
Created by
404FileNotFound
Tier 2
5 views
1 follower
cubit010
requested changes for Flight Controller ago
hey!
Cool FC!
There are some issues on the fc though, please modify the design so that the usb data line doesn't get routed through vias please!
also use differential routing, and fix the skews!
your cart is also very different from your requested $ amount, and the screenshot from jlcpcb is missing
please also double check https://blueprint.hackclub.com/about/submission-guidelines and format your github repo according to it (you're missing bom)
404FileNotFound
submitted Flight Controller for ship review ago
404FileNotFound
added to the journal ago
Finished the PCB
Finished the entire PCB. This build in its entirety includes a STM32H7 Chip, GPS, IMU, BMP, Magnetometer, Battery charger, and much more. Also added a 3.3V buck to make it look sxier.
404FileNotFound
added to the journal ago
Finished with the foorprint issues and did half of the fp
I had a little issue with the footprints and after solving that i have finished half of the PCB. And the hardest part was wiring the BMP. Overall it came out pretty messy and i had to use a lot of Through vias/holes.
404FileNotFound
added to the journal ago
Finished with the schematic FOR REAL
Learnt how to use Cube MX and used that and tons of more stuff to wire the MCU and had to rename all the parts of the I2C2 connections cause i didnt know they had to be named the same way
404FileNotFound
added to the journal ago
Finished with the schematics
Finished with the schematics and wrote the name and the date to make it look make se*ier. Finished the battery charger and the GPS with its antennas too.
404FileNotFound
added to the journal ago
Almost done with the Schematic
Finished doing the BMP, 3.3V Buck, IMU, Magnetometer now working on the battery charger and the GPS. Also I learnt how to use datasheets of parts and got the lcsc.py programm working with the help of J.Robert Oppenheimer (HUGE CREDIT TO HIM).
404FileNotFound
added to the journal ago
Made the USB-C port to make it look more 🔥
-Made the UBS-C port got the libraries working and uploaded everything in a neat way ready for the future schematic changes
-Currently stuck on trying to make the battery charger
404FileNotFound
added to the journal ago
Finally Got the Libraries Working.
The Python wasn't working tried everything from virtual enviroments to redownloading everything. Didn't work on mac. So I sent the files to a person who has the converter and used that.
404FileNotFound
started Flight Controller ago
1/17/2026 2 AM - Finally Got the Libraries Working.
The Python wasn't working tried everything from virtual enviroments to redownloading everything. Didn't work on mac. So I sent the files to a person who has the converter and used that.
1/17/2026 1 PM - Made the USB-C port to make it look more 🔥
-Made the UBS-C port got the libraries working and uploaded everything in a neat way ready for the future schematic changes
-Currently stuck on trying to make the battery charger
1/18/2026 2 PM - Almost done with the Schematic
Finished doing the BMP, 3.3V Buck, IMU, Magnetometer now working on the battery charger and the GPS. Also I learnt how to use datasheets of parts and got the lcsc.py programm working with the help of J.Robert Oppenheimer (HUGE CREDIT TO HIM).
1/18/2026 3 PM - Finished with the schematics
Finished with the schematics and wrote the name and the date to make it look make se*ier. Finished the battery charger and the GPS with its antennas too.
1/28/2026 - Finished with the schematic FOR REAL
Learnt how to use Cube MX and used that and tons of more stuff to wire the MCU and had to rename all the parts of the I2C2 connections cause i didnt know they had to be named the same way
1/29/2026 9 AM - Finished with the foorprint issues and did half of the fp
I had a little issue with the footprints and after solving that i have finished half of the PCB. And the hardest part was wiring the BMP. Overall it came out pretty messy and i had to use a lot of Through vias/holes.
1/29/2026 5 PM - Finished the PCB
Finished the entire PCB. This build in its entirety includes a STM32H7 Chip, GPS, IMU, BMP, Magnetometer, Battery charger, and much more. Also added a 3.3V buck to make it look sxier.