1/19/2026 - Trying to setup the custom python stuff

Getting stuck trying to do these custom python scripts, will try to figure it out after having some dinner and calming down after crashing out.

Here is the error I keep getting:

1/25/2026 11 AM - I figured it out

I figured it out and now my schematic is done it took me a while to figure out where everything went and I had to look back the insturctions too many times to count,

Here is a photo of my schematic:

1/25/2026 1 PM - I started routing and organizing the pcb

I started routing and organizing the pcb and this was hard because some things could go some places and other things could go other places and also somethings could be where every they could go and this made me think how hard people work in order to make the most effecicent and most effective pcb boards in order to make things the way they want them to be.

Here is a photo of where I'm at:

1/25/2026 6:15 PM - I made everything fit on the outline and added the 3d models

I made everything fit on the outline and added the 3d models to the design, this took a while because everything had to be fitted into a specific dimensions, and also finding the specific .wrl files for the 3d models of the components.

Here is a photo of the pcb:

Here is some photos of the 3d of the pcb:

1/25/2026 6:55 PM - I started to route the board.

I started to route the board and I ran into hell because pf the amount of routing this board has to do, this made me continually think that engineering is not easy but the rewards out the bad.

Here are is an image of where I am currently at: