3d printed cactus plant pot
3d printed cactus plant pot inspired by the mario green passage tubes he uses to travel.
Created by
martiksimonian27
Tier 5
3 views
0 followers
Tanuki ⚡🚀
requested changes for 3d printed cactus plant pot ago
Hey! Couple things:
- Please add more effort! Currently this feels like it's 3 cylinders in tinkercad smashed together. I think you should add a drain hole, exp with the layer lines, and add more funtionality!
- Additionally, please polish the readme. check submission reqs for a reminder of everything that should be there. Remember: frame the readme for the world to see, not as a submission. The "cart" does not have to be in the readme
- The step here, which is stl to step, is not suffecient. Please model this in onshape or fusion!
- we cant give you a shipping grant for every project, this can be greatly reduced by shipping togther.
All requirements could be found at https://blueprint.hackclub.com/about/submission-guidelines, feel free to ping me in #blueprint-drafts if you have a question :)
martiksimonian27
submitted 3d printed cactus plant pot for review ago
martiksimonian27
added to the journal ago
De bottom plate and finial touches
I just took a cylinder made a copy of the first thing I made, made it hole and groupes it later I did adjust it because it fit yes but I wanted it a little bigger then the hole cylindrical shape. After that I just colored it and messed around with the sizes. The hole cylindrical share is now 130 by 130.
martiksimonian27
added to the journal ago
Added the top ring part
I just put a ring in made it the correct size, in the end product I did really adjust it a lot until I got the perfect ratio between the hole cylindrical shapre and this ring.
martiksimonian27
added to the journal ago
Made the pot itself on tinkercad
I began by just putting a cylinder I think 100 by 100 and made another one but hole, that one is 95 by 95 centered it and grouped it so now I have a hole cylinder to work with.
martiksimonian27
started 3d printed cactus plant pot ago
1/20/2026 5 PM - Made the pot itself on tinkercad
I began by just putting a cylinder I think 100 by 100 and made another one but hole, that one is 95 by 95 centered it and grouped it so now I have a hole cylinder to work with.
1/20/2026 6:52 PM - Added the top ring part
I just put a ring in made it the correct size, in the end product I did really adjust it a lot until I got the perfect ratio between the hole cylindrical shapre and this ring.
1/20/2026 6:57 PM - De bottom plate and finial touches
I just took a cylinder made a copy of the first thing I made, made it hole and groupes it later I did adjust it because it fit yes but I wanted it a little bigger then the hole cylindrical shape. After that I just colored it and messed around with the sizes. The hole cylindrical share is now 130 by 130.