Sharky
THIS PROJECT IS PURELY FOR EDUCATIONAL PURPOSES , DO NOT USE THIS FOR UNFAIR USES! - THIS IS A BLUETOOTH AND WIFI 2.4GHz JAMMER/DEAUTHER USING ESP-32 & nRF24L01
Created by
speedhawks
Tier 4
17 views
0 followers
alexren ⚡🚀
approved Sharky ago
Tier approved: 4
Grant approved: $36.00
send a video in #blueprint once you built this thing! (if its legal lol)
speedhawks
submitted Sharky for ship review ago
speedhawks
added to the journal ago
Add missing build files and flashing instructions per review
As @alexren said to include the CMakeList. I have pushed the changes to repo.
The flashing instructions are in the readme.
I also added a delay between switching the channels, so it will now be stable.
alexren ⚡🚀
requested changes for Sharky ago
hi there! im returning this project because the firmware is incomplete - AI generated firmwares are OK, but you're missing a CMake List or otherwise compile & flashing instructions for the device
speedhawks
submitted Sharky for ship review ago
speedhawks
added to the journal ago
Done with the coding
Nothing much but I hate c++. I am using both the nrf modules at max power , with the all channel sweep mode. I would get roughly 12-14hrs of runtime with the 1200mah battery . I hope all this works
Note to reviewer - I have converted the prices from inr to usd as per the current conversion . Its approx 33USD including 10$ for the case from printing legion , I estimated this cost as the hackpad grant had said to use 10$ for the case.
speedhawks
added to the journal ago
Made the case
I can't believe I just made this, it was very easy, took some help of gemini for few things. It turned out so good. This was just my 2nd time making something in fusion. Here are some looks of it.
speedhawks
added to the journal ago
FInished with the pcb
I have finished routing the pcb , added copper ground for thermal management and RF shielding . now its time for building the case, which is the tough part. Wish me luck!
speedhawks
added to the journal ago
Done with schematics
This project is going to be so cool !! 😎 I saw this on YouTube shorts, I first studied how these components work. It's kinda easyy . I am also planning to build a case for it , it will be powered by 1200mah battery. 
speedhawks
started Sharky ago
1/22/2026 1 PM - Done with schematics
This project is going to be so cool !! 😎 I saw this on YouTube shorts, I first studied how these components work. It's kinda easyy . I am also planning to build a case for it , it will be powered by 1200mah battery. 
1/22/2026 6 PM - FInished with the pcb
I have finished routing the pcb , added copper ground for thermal management and RF shielding . now its time for building the case, which is the tough part. Wish me luck!
1/24/2026 7 PM - Made the case
I can't believe I just made this, it was very easy, took some help of gemini for few things. It turned out so good. This was just my 2nd time making something in fusion. Here are some looks of it.
1/24/2026 11 PM - Done with the coding
Nothing much but I hate c++. I am using both the nrf modules at max power , with the all channel sweep mode. I would get roughly 12-14hrs of runtime with the 1200mah battery . I hope all this works
Note to reviewer - I have converted the prices from inr to usd as per the current conversion . Its approx 33USD including 10$ for the case from printing legion , I estimated this cost as the hackpad grant had said to use 10$ for the case.
2/12/2026 - Add missing build files and flashing instructions per review
As @alexren said to include the CMakeList. I have pushed the changes to repo.
The flashing instructions are in the readme.
I also added a delay between switching the channels, so it will now be stable.
