1/21/2026 8 AM - Hi Today I registered and opened up a doc file

I registered my project and my first submission i deleted it for a fresh start soldered some old PCB's for practice since i was out of touch my parents were proud about it checked on stuff i have and what i don't to make myself ready for next day overall



went nice today these are tables i did and a pretty clumsy arrangenmet too

1/21/2026 10 PM - Design Outing

Today I designed my outline structure using blender going for a shiny look in prortype online design and planning to change it in future so adding it in a non frajile way is the hard point thinking of a way to do this

planning to meet a company's CEO later today for board printing and ai boards instead of raspberrry pi

1/22/2026 12:15 AM - Looked For Compatible Parts

I looked some compatible parts for the project to use i only found out a few options but still they are worth the search still finding some more supplier later today and finally the meeting was done online with CEO of Vichaarak

1/22/2026 12:26 AM - Featuring and Concluding Boards

So i looked at axon and vaaman boards from vicharak which is cool but need the funding to do so took me 2-3 hours to find all this stuff about those boards so yeah an 3hrs put into good useran some app
le virtual machines to run mac os for xcode to use swift for better ui

1/22/2026 2 AM - Starter Parts Sourced

Now i sourced parts needed to start this project this will act as the base according to time and money i need to use this is both cost and standerd efficient for this project and this is base

1/30/2026 6:42 PM - Designed direct power for pcb

i now created my own pcb with custom power route for the compute module 5 board planning to add more ports nvme hats etc and created different sheets in ki cad!

1/30/2026 6:44 PM - Compute module Schematics ready

Custom Compute mODULE 5 schemtics is ready to add into pcb and to add power routing etc to it with custom ressistor protection and fuse to
prevent it from over loading

1/30/2026 6:47 PM - Placed the parts in PCB

Today i have opened the pcb and placed parts in it and made down it to about 7 violations and 67 unconnected routes in the pcb which needs to be connected and add the planes etc

1/30/2026 6:49 PM - Added Planes in PCB

i added the F.cu and B.cu to grround in pcb and planning to manually route 5v and 3.3 v next step so ow i have addded and the drc violation came to 3 and unconnected items 7

1/30/2026 6:52 PM - Routed the PCB

i finally finished routing the pcb from gnd to 5v to 3.3v ressistors edge cuts the board is polished etc addding more io Bms nvme slots gpio audio amplification unit etc is to be added soon