fume extractor
I REALLY need one as i solder in my bedroom, it uses a carbon filter and pwm controller, no pcb tho
Created by
chris
Tier 5
6 views
0 followers
CAN ⚡🚀
approved fume extractor ago
Tier approved: 5
Grant approved: $23.00
Awesome
chris
submitted fume extractor for ship review ago
Iamalive 🚀
requested changes for fume extractor ago
One final thing (SORRY) since we now require source cad files, please make sure to include it! (.f3d for fusion, onshape link, etc)
chris
submitted fume extractor for ship review ago
zsharpminor
requested changes for fume extractor ago
Hi, two very minor things (you're so close!) You're missing the required README sections outlined in https://blueprint.hackclub.com/about/submission-guidelines - how and why you made it - and additionally, please add a rendered image of your assembled model including 3d models of your parts inside of your CAD. Finally, we need a screenshot of your AliExpress checkout page (not just the individual items) to account for taxes. Thanks!
chris
submitted fume extractor for ship review ago
Iamalive 🚀
requested changes for fume extractor ago
Thanks for listening! Just change your cad fiels to .step and you should be fine :)
chris
submitted fume extractor for ship review ago
chris
added to the journal ago
changed
I have change the parts as i was told to make it cheaper, got it sub 15$, everything is on aliexpress
I have also changed the Wiring, as the old one was confusing.
zsharpminor
requested changes for fume extractor ago
Hi, this is a dope project! Could you please try to get your fan and other Amazon parts from AliExpress? You should be able to significantly optimize your cost that way. Also, your wiring is a bit incomplete - you're wiring 9V to a PWM to a fan - with no way to control said PWM? Please elaborate on that! Thanks :)
chris
submitted fume extractor for ship review ago
chris
added to the journal ago
finished github
I have finished the github page and did the BOM, I have also done the wiring
https://github.com/Bananaking23/Fume-extractor
the total was 23.96, i am quite happy with the design
chris
added to the journal ago
case
I have looked at components i need and i have decided to use a carbon filter, a 12v pc case fan, and a pwm controller
I have finished designing the case 
chris
started fume extractor ago
1/25/2026 5 PM - case
I have looked at components i need and i have decided to use a carbon filter, a 12v pc case fan, and a pwm controller
I have finished designing the case
1/25/2026 6 PM - finished github
I have finished the github page and did the BOM, I have also done the wiring
https://github.com/Bananaking23/Fume-extractor
the total was 23.96, i am quite happy with the design
1/26/2026 - changed
I have change the parts as i was told to make it cheaper, got it sub 15$, everything is on aliexpress
I have also changed the Wiring, as the old one was confusing.