Kapad
My macropad for cool stuff! I will make it so I can map it to whatever I want depending on the active program.
Created by
kavyansh.
Hackpad
29 views
0 followers
alexren ⚡🚀
approved Kapad ago
Tickets awarded: 150 tickets
Tier: 4
Awesome project!
kavyansh.
submitted Kapad for ship review ago
kavyansh.
added to the journal ago
Firmware
Updated the firmware to work as a slack emoji macropad.
ig this is enough to submit now right?
Top 1 Left 1 key: :hs:
Top 1 Left 2 key: (face)
Top 1 Left 3 key: :skullpray:
Top 1 Left 4 key: :cryign:
Top 2 Left 1 key: BONK!
Top 2 Left 2 key: :why:
Top 2 Left 3 key: :no-no:
Top 2 Left 4 key: :pf:
Top 3 Left 1 key: :thonk:
Top 3 Left 2 key: :noooovanish:
Top 3 Left 3 key: :yesyes:
Top 3 Left 4 key: :skull:
Top 4 Left 1 key: :loll:
Top 4 Left 2 key: :skulkest-1::skulkest-2::skulkest-3::skulkest-4::skulkest-5::skulkest-6::skulkest-7::skulkest-8:
Top 4 Left 3 key: :skulker:
Top 4 Left 4 key: :skulk:
kavyansh.
added to the journal ago
Built the thingy
So, I started with the LEDs, but I soldered it wrong and something bridged
(I know, my SMD soldering sucks)
I removed what I thought was faulty, still didnt work.
So I built a macropad without the LEDs.
This is how it looks now.
Pretty cool, right?
kavyansh.
added to the journal ago
Shipment delivery
I recieved my PCB!
Also had received my 3d printed case a while ago, but forgot to log it lol
Just added the 0.2 hours (12 minutes) it took me to open it. (why do they vaccum pack the PCBs like that :hs:)
1mon ⚡
approved Kapad ago
nice work on the hackpad, the case is really clean!
kavyansh.
submitted Kapad for ship review ago
Shadow
requested changes for Kapad ago
Hey! Great work on your hackpad , but could you please re-check the schematics , you have used a +5V symbol for LEDs but haven't connected it to xiao! Also don't forget to route it correctly after fixing the schematics. Thanks
kavyansh.
submitted Kapad for ship review ago
kavyansh.
submitted Kapad for ship review ago
kavyansh.
started Kapad ago
2/26/2026 - Shipment delivery
I recieved my PCB!
Also had received my 3d printed case a while ago, but forgot to log it lol
Just added the 0.2 hours (12 minutes) it took me to open it. (why do they vaccum pack the PCBs like that :hs:)
3/2/2026 - Built the thingy
So, I started with the LEDs, but I soldered it wrong and something bridged
(I know, my SMD soldering sucks)
I removed what I thought was faulty, still didnt work.
So I built a macropad without the LEDs.
This is how it looks now.
Pretty cool, right?
3/3/2026 - Firmware
Updated the firmware to work as a slack emoji macropad.
ig this is enough to submit now right?
Top 1 Left 1 key: :hs:
Top 1 Left 2 key: (face)
Top 1 Left 3 key: :skullpray:
Top 1 Left 4 key: :cryign:
Top 2 Left 1 key: BONK!
Top 2 Left 2 key: :why:
Top 2 Left 3 key: :no-no:
Top 2 Left 4 key: :pf:
Top 3 Left 1 key: :thonk:
Top 3 Left 2 key: :noooovanish:
Top 3 Left 3 key: :yesyes:
Top 3 Left 4 key: :skull:
Top 4 Left 1 key: :loll:
Top 4 Left 2 key: :skulkest-1::skulkest-2::skulkest-3::skulkest-4::skulkest-5::skulkest-6::skulkest-7::skulkest-8:
Top 4 Left 3 key: :skulker:
Top 4 Left 4 key: :skulk: