Rohan
added to the journal ago
I have routed the pcb
I made sure its very compact under 50x40mm it uses 4 layers since its very compact and I just need to likely change the thickness of the J6 pins to 2mm because it takes around 8 Amps adn the lines currently can handle only 3-4 Amps also had some clearence issues 
PS:THis is a proxy im not looking for funding or anything this is for #kit-lab go rsvp now!
Rohan
added to the journal ago
Made the pcb schematic
I have made the schematic of the entire flgith controller it uses s12302 mosfets and its quite a simple flight controller overall.
I made it simple so that it can be compact for a mini drone 
Rohan
started Vector-12 ago
3/1/2026 8 PM - Made the pcb schematic
I have made the schematic of the entire flgith controller it uses s12302 mosfets and its quite a simple flight controller overall.
I made it simple so that it can be compact for a mini drone
3/1/2026 9 PM - I have routed the pcb
I made sure its very compact under 50x40mm it uses 4 layers since its very compact and I just need to likely change the thickness of the J6 pins to 2mm because it takes around 8 Amps adn the lines currently can handle only 3-4 Amps also had some clearence issues
PS:THis is a proxy im not looking for funding or anything this is for #kit-lab go rsvp now!