Blueprint

VantaPad

A sleek black macropad with an OLED, rotary encoder, 6 keys, and a cute little alien. Used for generic controls on my computer.

Created by thearnaanshah thearnaanshah

Hackpad

5 views

0 followers

CAN CAN ⚡🚀 approved VantaPad ago

Tickets awarded: 110 tickets

Tier: 4

Very cool, looks good as well. Some hours have been reduced due to soldering time. Otherwise, a strong project with an amazing result!

thearnaanshah thearnaanshah submitted VantaPad for ship review ago

cubit010 cubit010 ⚡ requested changes for VantaPad ago

fixing perma reject by paglu
you should be able to resubmit now!

Tier: 4

thearnaanshah thearnaanshah submitted VantaPad for ship review ago

thearnaanshah thearnaanshah added to the journal ago

Completed! - Finishing Firmware and Debugging OLED

This session I focused on getting my OLED to work and finishing up the firmware.

I left off with almost everything working except the OLED. I spent what felt like forever looking through the QMK docs and random forum posts about OLED displays.

After not finding a solution, I asked the #blueprint channel in the slack and received many helpful replies that led me to attempt a test using a basic sketch and the arduino IDE just to check if the OLED was working.

image

And it worked! It was properly displaying text on the screen. So, I continued on trying to make it work with the QMK firmware.

After looking into specific documentation for the rp2040 and it's i2c configuration, I figured out that I needed to explicitly define things in my config.h for it to work.

image

And after flashing, it was working amazingly! I was thrilled to see my name, the layer count, and my alien animation all on the screen.

However, after testing some more, I realized I could be doing more with the screen. I then decided to add the label "Vantapad" and the autoclicker status to the screen. Additionally, I added more frames to the animation to make it look much smoother.

image

And then I was done! I had a fully working VantaPad 🥹

image
image

I'm thrilled with everything I learned and really think this has had great benefits on me. I'll forever be happy when I look down and see a little alien looking back up at me.

thearnaanshah thearnaanshah added to the journal ago

Flashing Firmware and Debugging Encoder

This session I flashed my first firmware onto the macropad and also managed to debug some things that weren't working.

After the first flash I was pleased to see that a majority of the functions worked. All the keys worked flawlessly and the RGBs were breathing which looked awesome. However, both the rotations on the encoder and the OLED display weren't doing anything.

I decided to work on fixing the encoder first because it seemed simpler. After doing some research, I figured out that I just had to change the resolution and add debounce in Keyboard.json. When I was testing, the rotations were backwards so I swapped the encoder pins.
image

And then it worked amazingly! I was really happy and now I could use it for volume, tab scrolling, and undo/redo.

I still need to fix the OLED display, but after that everything should work properly.

thearnaanshah thearnaanshah added to the journal ago

Soldered microcontroller, OLED, and LEDS + Tested Current

This session I spent a long time getting the rest of the components soldered onto the PCB.

I think it took so long because of how many connections there were and because I had to learn how to solder surface mounted components.

I first soldered all the header pins to the board, then the components to the header pins, and finally the LEDS to their pads.

image

After that, I used a multimeter to test all the connections and ensure they were solid and fixed those that weren't.

thearnaanshah thearnaanshah added to the journal ago

Soldered switches, diodes, and encoder

This session I spent some time soldering the easiest components, the switches, the diodes, and the encoder.

I started with the switches and the first one took me a while but then I understood and got quicker.

Then moving onto the diodes I first placed them into the board in the correct orientation and then bent the leads so they would stay in place.

Finally I soldered the encoder. I first held it down using some tape so I could solder the mounting tabs, then I removed it to solder the rest.

Then I was done!
image

thearnaanshah thearnaanshah added to the journal ago

Adjusted CAD Model Slightly and Printed Case

After finishing my design, I had to wait a while for all the parts to get shipped. So, I decided to start printing the case.

When I threw the model in my slicer, I noticed that some of the walls were extremely thin, which would have caused issues later on. I went into Fusion 360 and used the Press/Pull modifier to fix this and make them 1mm thicker.
image

I then began printing it using the 0.08mm High Quality print profile in Bambu Studio.
image

samliu samliu ⚡🚀 approved VantaPad ago

Awesome design. Approved!

thearnaanshah thearnaanshah submitted VantaPad for ship review ago

Shadow Shadow requested changes for VantaPad ago

Cool hackpad! But could you just change the LED footprint? You can find the right one here! Everything else looks good to me. Just ping me when you submit again, and I can approve it!

thearnaanshah thearnaanshah submitted VantaPad for ship review ago

Shadow Shadow requested changes for VantaPad ago

Hey! Cool Hackpad, I loved the design, but the readme needs to be written completely by you and not AI! Also, please go through submission guidelines before submitting again!

thearnaanshah thearnaanshah submitted VantaPad for ship review ago

thearnaanshah thearnaanshah started VantaPad ago

3/31/2026 - Adjusted CAD Model Slightly and Printed Case

After finishing my design, I had to wait a while for all the parts to get shipped. So, I decided to start printing the case.

When I threw the model in my slicer, I noticed that some of the walls were extremely thin, which would have caused issues later on. I went into Fusion 360 and used the Press/Pull modifier to fix this and make them 1mm thicker.
image

I then began printing it using the 0.08mm High Quality print profile in Bambu Studio.
image

4/1/2026 - Soldered switches, diodes, and encoder

This session I spent some time soldering the easiest components, the switches, the diodes, and the encoder.

I started with the switches and the first one took me a while but then I understood and got quicker.

Then moving onto the diodes I first placed them into the board in the correct orientation and then bent the leads so they would stay in place.

Finally I soldered the encoder. I first held it down using some tape so I could solder the mounting tabs, then I removed it to solder the rest.

Then I was done!
image

4/5/2026 - Soldered microcontroller, OLED, and LEDS + Tested Current

This session I spent a long time getting the rest of the components soldered onto the PCB.

I think it took so long because of how many connections there were and because I had to learn how to solder surface mounted components.

I first soldered all the header pins to the board, then the components to the header pins, and finally the LEDS to their pads.

image

After that, I used a multimeter to test all the connections and ensure they were solid and fixed those that weren't.

4/6/2026 - Flashing Firmware and Debugging Encoder

This session I flashed my first firmware onto the macropad and also managed to debug some things that weren't working.

After the first flash I was pleased to see that a majority of the functions worked. All the keys worked flawlessly and the RGBs were breathing which looked awesome. However, both the rotations on the encoder and the OLED display weren't doing anything.

I decided to work on fixing the encoder first because it seemed simpler. After doing some research, I figured out that I just had to change the resolution and add debounce in Keyboard.json. When I was testing, the rotations were backwards so I swapped the encoder pins.
image

And then it worked amazingly! I was really happy and now I could use it for volume, tab scrolling, and undo/redo.

I still need to fix the OLED display, but after that everything should work properly.

4/7/2026 - Completed! - Finishing Firmware and Debugging OLED

This session I focused on getting my OLED to work and finishing up the firmware.

I left off with almost everything working except the OLED. I spent what felt like forever looking through the QMK docs and random forum posts about OLED displays.

After not finding a solution, I asked the #blueprint channel in the slack and received many helpful replies that led me to attempt a test using a basic sketch and the arduino IDE just to check if the OLED was working.

image

And it worked! It was properly displaying text on the screen. So, I continued on trying to make it work with the QMK firmware.

After looking into specific documentation for the rp2040 and it's i2c configuration, I figured out that I needed to explicitly define things in my config.h for it to work.

image

And after flashing, it was working amazingly! I was thrilled to see my name, the layer count, and my alien animation all on the screen.

However, after testing some more, I realized I could be doing more with the screen. I then decided to add the label "Vantapad" and the autoclicker status to the screen. Additionally, I added more frames to the animation to make it look much smoother.

image

And then I was done! I had a fully working VantaPad 🥹

image
image

I'm thrilled with everything I learned and really think this has had great benefits on me. I'll forever be happy when I look down and see a little alien looking back up at me.