Ramadan Mega Lantern
Large lantern with magnets, lights and cool designs!
Created by
Burst
Tier 5
6 views
0 followers
Shadow
requested changes for Ramadan Mega Lantern ago
user req
Burst
submitted Ramadan Mega Lantern for ship review ago
Burst
added to the journal ago
Assembly and links
I added assembly pictures in the github document with arrows, I also made sure the links are in the BOM
gggggggggggggggggggggggggggggggggggggggggggggggg
Souptik Samanta 🚀
requested changes for Ramadan Mega Lantern ago
Hey, there’s no clear guide for the assembly. Could you please add one and also include item links in the BOM.csv
Burst
submitted Ramadan Mega Lantern for ship review ago
Burst
added to the journal ago
Added direction and better description
I added a better description in GitHub explanation everything and where is goes. I described how everything is supposed to be mounted and assembled!!!
samliu ⚡🚀
requested changes for Ramadan Mega Lantern ago
Hi! What's your plan to assemble this? I can't tell how you're going to attach everything. Can you make sure you write about it in your README or somewhere else? Your project needs to be shipped, which means that anyone can look at your repository, tell what it is, how to build it themselves, and how to use it.
Burst
submitted Ramadan Mega Lantern for ship review ago
Burst
added to the journal ago
Added needed files
I added all the step files and fully build model!
sffuuisdfhudhufsduifhuidhfuhidsduifduhfudhshudfiuduhifduisasfhudsufduhsdsfuadchuxshuiuhdshudvudhdsudf
PenguinMo
requested changes for Ramadan Mega Lantern ago
Hi, nice lamp, I'm fasting this Ramadan too! Your project still needs the .step files, and please add a fully built model, but besides that, everything looking clean, can't wait to see you build this!
Burst
submitted Ramadan Mega Lantern for ship review ago
Burst
added to the journal ago
Polished, Rendered, Github finished
I started for polishing the design and making sure the measurements are good. I played around with the rendering and got some really cool ones.
I lastly went to aliexpress and finalized everything and tried to find cheaper lights and magnets, which I did find.
I made everything in github, readme.md, file and pictures.
Burst
added to the journal ago
added more features, and found items
I started by adding a connector with tolerances to connect the base and main body. 
I added a hanger hole at the top 
I them found 4mm wide neo magnets for a strong connection at the top
I then found an rgb strip powered by a battery to put in the top 
I then made a spot for the connector after researching the battery side and reverse engineering the the dimensions. 
I lastly combined all the bodies and sliced the model to find any issues.
Burst
added to the journal ago
Created the main parts for the project
I started on a lantern the is used in many cultural events. I started from bottom to top, first with the base. After that I had to play around with the degree of the extrude to 1. make sure its printable, and 2. make sure it looks proportional and fits well with the base. I then moved onto the main body that it an octagon shape, with each side being a different body. Im making this whole design in seperate bodies so It can be scalable and assembled at any size. I had to find a way to make it only a shell, because the shell tool make three walls for the three sides. while i only needed one side walled. So I did that in the actual sketch. For the top cover I tried using the sweep tool to create a cool shape, but that didn't end up working at all. I eventually used the loft tool to get it to work and ended up with what I have rn. I lastly made the main body a bit taller.
Burst
started Ramadan Mega Lantern ago
2/22/2026 3 PM - Created the main parts for the project
I started on a lantern the is used in many cultural events. I started from bottom to top, first with the base. After that I had to play around with the degree of the extrude to 1. make sure its printable, and 2. make sure it looks proportional and fits well with the base. I then moved onto the main body that it an octagon shape, with each side being a different body. Im making this whole design in seperate bodies so It can be scalable and assembled at any size. I had to find a way to make it only a shell, because the shell tool make three walls for the three sides. while i only needed one side walled. So I did that in the actual sketch. For the top cover I tried using the sweep tool to create a cool shape, but that didn't end up working at all. I eventually used the loft tool to get it to work and ended up with what I have rn. I lastly made the main body a bit taller.
2/22/2026 4 PM - added more features, and found items
I started by adding a connector with tolerances to connect the base and main body.
I added a hanger hole at the top
I them found 4mm wide neo magnets for a strong connection at the top
I then found an rgb strip powered by a battery to put in the top
I then made a spot for the connector after researching the battery side and reverse engineering the the dimensions.
I lastly combined all the bodies and sliced the model to find any issues.
2/23/2026 - Polished, Rendered, Github finished
I started for polishing the design and making sure the measurements are good. I played around with the rendering and got some really cool ones.
I lastly went to aliexpress and finalized everything and tried to find cheaper lights and magnets, which I did find.
I made everything in github, readme.md, file and pictures.
3/6/2026 6 AM - Added needed files
I added all the step files and fully build model!
sffuuisdfhudhufsduifhuidhfuhidsduifduhfudhshudfiuduhifduisasfhudsufduhsdsfuadchuxshuiuhdshudvudhdsudf
3/6/2026 8 PM - Added direction and better description
I added a better description in GitHub explanation everything and where is goes. I described how everything is supposed to be mounted and assembled!!!
3/9/2026 - Assembly and links
I added assembly pictures in the github document with arrows, I also made sure the links are in the BOM
gggggggggggggggggggggggggggggggggggggggggggggggg