passthrupwr
A usb-c in/out board to enable power delivery to devboards without any battery charging management
Created by
danny 🚀
Tier 4
2 views
0 followers
danny 🚀
added to the journal ago
Created Schematic from Component Research
The IP5306's datasheet provides a recommended schematic which I modified a little to use the two led design and simplified it a little based on another source.
https://done.land/components/power/powersupplies/battery/chargers/charge-discharge/ip5306/
https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881926710546432

danny 🚀
added to the journal ago
Research
I researched some of the core components I would need for this and created a simple electrical diagram before my schematic

It will simply be a board that sits between usb-c from a computer to a devboard that does not have any battery manager/connection
danny 🚀
started passthrupwr ago
2/23/2026 - Research
I researched some of the core components I would need for this and created a simple electrical diagram before my schematic

It will simply be a board that sits between usb-c from a computer to a devboard that does not have any battery manager/connection
2/24/2026 - Created Schematic from Component Research
The IP5306's datasheet provides a recommended schematic which I modified a little to use the two led design and simplified it a little based on another source.
https://done.land/components/power/powersupplies/battery/chargers/charge-discharge/ip5306/
https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881926710546432
