Neodeck
A handheld hidpi neopixel display with USB hs and large current handling.
Created by
chengyin.yao 🚀
Tier 1
37 views
0 followers
chengyin.yao 🚀
submitted Neodeck for ship review ago
PenguinMo
requested changes for Neodeck ago
Hi, nice project but you need to listen to the previous reviewer and change the tier, because you can't resubmit to blue print feel free to submit to any other hardware YSWS
chengyin.yao 🚀
submitted Neodeck for ship review ago
CAN ⚡🚀
requested changes for Neodeck ago
Sorry but this would only qualify as tier 2 or 3
chengyin.yao 🚀
submitted Neodeck for ship review ago
Shadow
requested changes for Neodeck ago
Hey! Please read through the submission guidelines to make sure your project has everything, and you upload all the required files: submission guidelines, also you need to 3D case for it and this is not a tier 1 project, please try to optimize your BOM for cheapest components and include a breakdown of PCB costs, thanks
chengyin.yao 🚀
submitted Neodeck for ship review ago
chengyin.yao 🚀
added to the journal ago
Finished routing
Finished routing everything out w/ power considerations
This is also the final state of my schematic .
Got a few k components per board .
chengyin.yao 🚀
added to the journal ago
Continued drawing
Drew more of the MCU part, added a custom power path and a 3v reg, while ensuring the 5v path gets enough current and doesn't burn everything else. Also fixed the chip
chengyin.yao 🚀
added to the journal ago
Drew much more of the schematic
Drew the mcu that was left and a bit of the buck part, then expanded the led count
and finally laid out some of the leads. Continue tmr on this project
chengyin.yao 🚀
added to the journal ago
Drew MCU
Drew the chips and decided which ones I should use . .
chengyin.yao 🚀
added to the journal ago
Drew neopixels
Made a custom symbol & footprint for the neopixels
Drew a ton of them .
chengyin.yao 🚀
started Neodeck ago
2/27/2026 - Drew neopixels
Made a custom symbol & footprint for the neopixels
Drew a ton of them .
2/28/2026 - Drew MCU
Drew the chips and decided which ones I should use . .
3/1/2026 - Drew much more of the schematic
Drew the mcu that was left and a bit of the buck part, then expanded the led count
and finally laid out some of the leads. Continue tmr on this project
3/3/2026 - Continued drawing
Drew more of the MCU part, added a custom power path and a 3v reg, while ensuring the 5v path gets enough current and doesn't burn everything else. Also fixed the chip
3/4/2026 - Finished routing
Finished routing everything out w/ power considerations
This is also the final state of my schematic .
Got a few k components per board .