mechanical keyboard
A 80% mechanical keyboard Made using a Raspberry pi pico RP2040
Created by
peleg2210 🚀
Tier 3
53 views
1 follower
nimit ⚡🚀
requested changes for mechanical keyboard ago
Gonna reject this again. Your README and BOM are not organized properly, and your file structure is not proper. You are also missing firmware, just a proof of concept will do for now. The PCB files should ideally be in the PCB folder, not src. Your assembly (Case + PCB) should be in a step file too. Your Case is also too simple, we don't allow box cases, try to make it better. The mounting is also unclear, as your case does not have any areas for inserts or screws
peleg2210 🚀
submitted mechanical keyboard for ship review ago
peleg2210 🚀
added to the journal ago
Created the case
3D modeled the case for the keyboard, This is a template of how i'm gonna make the Wood version of this case, and how it should look.
The case was made quite simply just to allow for a vision of it
CAN ⚡🚀
requested changes for mechanical keyboard ago
Please make a 3d printed case for this
peleg2210 🚀
submitted mechanical keyboard for ship review ago
technical_.
requested changes for mechanical keyboard ago
Please upload screenshots of your cart, so we can see why $50 is warranted.
You have been rejected many times, so please review the submission guidelines very carefully.
https://blueprint.hackclub.com/docs/submission-guidelines
peleg2210 🚀
submitted mechanical keyboard for ship review ago
technical_.
requested changes for mechanical keyboard ago
As I had said before, please edit your READ.ME to incorporate a more lengthy description. Please use the advice from previous returns to improve your submission.
If this is not edited in the next submission, this project will be permanently banned.
If you have questions about what a proper readme looks like, please check https://blueprint.hackclub.com/docs/submission-guidelines
peleg2210 🚀
submitted mechanical keyboard for ship review ago
technical_.
requested changes for mechanical keyboard ago
Please edit your READ.ME to incorporate a more lengthy description. Please use the advice from previous returns to improve your submission. Please note that multiple submissions without incorporating staff feedback will result in a permanent rejection.
peleg2210 🚀
submitted mechanical keyboard for ship review ago
samliu ⚡🚀
requested changes for mechanical keyboard ago
You requested to edit this. Please re-submit once you're done!
peleg2210 🚀
submitted mechanical keyboard for ship review ago
nimit ⚡🚀
requested changes for mechanical keyboard ago
Your README is entirely blank, please add some content into it. Also, you are missing the BOM as a table in the README, just use an online CSV to Markdown converter. Your journal entries are too spaced out, and it is evident that there is some inflation in the second entry. As a keyboard, you are also missing the CAD and Firmware to run it, so it is not possible to approve this right now. Please make the changes required by me and the other reviewers otherwise we may have to purge this project.
peleg2210 🚀
submitted mechanical keyboard for ship review ago
Kai the Jolly Guy 🚀
requested changes for mechanical keyboard ago
Please add a couple more journals, one journal for 65 hours is way too much, you should have one journal for every 10 hours or so. Also your PCB should NOT cost $75, please make sure you're not getting PCBA for THT components or using some weird settings!
peleg2210 🚀
submitted mechanical keyboard for ship review ago
CAN ⚡🚀
requested changes for mechanical keyboard ago
Did you mean to submit this? One of the journals is 65 hours long.
peleg2210 🚀
submitted mechanical keyboard for ship review ago
peleg2210 🚀
added to the journal ago
Finished routing the keyboard
I routed all the switches in the keyboard and the board
I litterly have nothing else to say here... What else should i put in here???????????
Well, hello whoever reads this, i.... dont know how to make keyboards, or use matrixes, but i learn! so hopefully i will be able to make this keyboard
peleg2210 🚀
added to the journal ago
finished layouting all the switches
I layouted all the keyboard's switches + the pi
In this part i created the layout and learned how to create a keyboard according to the 80% tkl layout, i used an online picture to do an accurate (hopefully) esstimaation about where each switch should go
peleg2210 🚀
started mechanical keyboard ago
9/23/2025 8 PM - finished layouting all the switches
I layouted all the keyboard's switches + the pi
In this part i created the layout and learned how to create a keyboard according to the 80% tkl layout, i used an online picture to do an accurate (hopefully) esstimaation about where each switch should go
9/23/2025 10 PM - Finished routing the keyboard
I routed all the switches in the keyboard and the board
I litterly have nothing else to say here... What else should i put in here???????????
Well, hello whoever reads this, i.... dont know how to make keyboards, or use matrixes, but i learn! so hopefully i will be able to make this keyboard
10/25/2025 - Created the case
3D modeled the case for the keyboard, This is a template of how i'm gonna make the Wood version of this case, and how it should look.
The case was made quite simply just to allow for a vision of it