ESP32-CAM Photo camera
A photo camera with a tft display,esp32 cam and sd card to capture photos and save them.
Created by
Sasukeop159
Tier 5
4 views
0 followers
Sasukeop159
submitted ESP32-CAM Photo camera for ship review ago
Shadow
requested changes for ESP32-CAM Photo camera ago
user req
Sasukeop159
submitted ESP32-CAM Photo camera for ship review ago
Sasukeop159
added to the journal ago
Done the firmware
After adding the cool arts to the pcb,i startedcoding a firmware for this it was hard though as i was using a ton of new libraries and made many mistakes but finally i managed to complete the firmware. Finally i fixed all the errors in the code and managed to make the code error free.
Sasukeop159
added to the journal ago
Added some cool arts to pcb
As the pcb was to plain, i addded some cool arts from both hackclub and my intrest in the pcb in easyeda. After that i also added some more arts to fill all the unused spaces in pcb.png)
Sasukeop159
added to the journal ago
Drew schematic & routed the pcb
day 1
today, I created a schematic for my camera using the easyeda browser version. It was easy for routing the pcb as there are only few routings. I spent most of time searching for symbol,footprint and 3d model for tft and esp32 cam. Also i spent a part of time learning about tft display and esp32 cam.
time spent:2 hour 30 min.png)
Sasukeop159
started ESP32-CAM Photo camera ago
3/7/2026 - Drew schematic & routed the pcb
day 1
today, I created a schematic for my camera using the easyeda browser version. It was easy for routing the pcb as there are only few routings. I spent most of time searching for symbol,footprint and 3d model for tft and esp32 cam. Also i spent a part of time learning about tft display and esp32 cam.
time spent:2 hour 30 min
3/18/2026 7 PM - Added some cool arts to pcb
As the pcb was to plain, i addded some cool arts from both hackclub and my intrest in the pcb in easyeda. After that i also added some more arts to fill all the unused spaces in pcb
3/18/2026 10 PM - Done the firmware
After adding the cool arts to the pcb,i startedcoding a firmware for this it was hard though as i was using a ton of new libraries and made many mistakes but finally i managed to complete the firmware. Finally i fixed all the errors in the code and managed to make the code error free.