Finished soldering

So I soldered the lights now, it worked but it has a lot of flush wires, I don’t have a flush cutter so I tried scissors but they didn’t worked so I took a plier(plas) and just twisted them until they came off, it worked beautifully

Received the parts and initial soldering

So I received the parts and started soldering but the thing is last time I used my soldering iron was probably 2-3 months ago and due to some weird reason I had trouble tinting it and basically just froze because of it cause I thought no tinting = no soldering. I tried different stuff like wrapping the tip in solder wire, acid flux, using blade to wipe off the corrosion of the tip but nothing worked, I slightly burned my finger in the process as well(touched a hot solder blob)

But anyway after wasting way too much time I started actually soldiering, I soldered all the components except lights first:

The single header pin was hard to solder because it kept moving and was hard to hold while soldering because it kept getting hot.