skibidi phone usb hub
a very skibidi usb hub for my google pixel 7. powered by the fe1.1s, providing 1 upstream usb c port, 2 downstream usb c ports, and 2 downstream usb a ports!!
Created by
tobi the wife lover 🚀
Tier 3
1 view
0 followers
tobi the wife lover 🚀
submitted skibidi phone usb hub for ship review ago
tobi the wife lover 🚀
added to the journal ago
removed bulk capacitor
after some researching, having a bulk 470uF capacitor while being bus powered risking tripping OCP, so the bulk capacitor has been removed, leaving only 50uF of combined capacitance on VBUS behind.
tobi the wife lover 🚀
added to the journal ago
designed protective cover for pcb
there were so much jank in the sketches when i was trying to use onshape like a drawing program lol. it came out so nice at the end tho so good job to onshape
tobi the wife lover 🚀
added to the journal ago
deco-ed the pcb!!!
may you bless your pcb with artwork... lots of artwork, like boykissers... include mentions! give shoutouts! the world is your white silkscreen oyster!! do solder mask, make your graphics SHINYY OOOOHHHHH
tobi the wife lover 🚀
added to the journal ago
finished pcb routing
zone fills are underrated. use them so you can minimize and maximize headaches of routing gnd or 5v and do more fun things such as routing usb and stuff
tobi the wife lover 🚀
added to the journal ago
Finished the rest of the schematic
routed upstream usb c, downstream usb c, usb a... the annoying part of importing lcsc footprints is that they don't use standard pin numbers. for example, instead of B1 A1 for usb c, they use 1 2 3, etc that only works with that part symbol
anyway,
tobi the wife lover 🚀
added to the journal ago
routed fe1.1s chip
the fe1.1s chip has built in symbol and footprint in kicad so it was really nice to work with it. it is also pretty cheap, you can get it on lcsc for 0.65 usd.
tobi the wife lover 🚀
started skibidi phone usb hub ago
3/20/2026 10 PM - routed fe1.1s chip
the fe1.1s chip has built in symbol and footprint in kicad so it was really nice to work with it. it is also pretty cheap, you can get it on lcsc for 0.65 usd.
3/20/2026 11 PM - Finished the rest of the schematic
routed upstream usb c, downstream usb c, usb a... the annoying part of importing lcsc footprints is that they don't use standard pin numbers. for example, instead of B1 A1 for usb c, they use 1 2 3, etc that only works with that part symbol
anyway,
3/21/2026 12 AM - finished pcb routing
zone fills are underrated. use them so you can minimize and maximize headaches of routing gnd or 5v and do more fun things such as routing usb and stuff
3/21/2026 1 AM - deco-ed the pcb!!!
may you bless your pcb with artwork... lots of artwork, like boykissers... include mentions! give shoutouts! the world is your white silkscreen oyster!! do solder mask, make your graphics SHINYY OOOOHHHHH
3/21/2026 4 AM - designed protective cover for pcb
there were so much jank in the sketches when i was trying to use onshape like a drawing program lol. it came out so nice at the end tho so good job to onshape
3/21/2026 1 PM - removed bulk capacitor
after some researching, having a bulk 470uF capacitor while being bus powered risking tripping OCP, so the bulk capacitor has been removed, leaving only 50uF of combined capacitance on VBUS behind.