3/27/2026 12 PM - Documented about the parts i would need to do this project

I started to document myself about the needed parts to start this project:

Here is the plan

1. Hardware

-Any microcontroller:
-Esp32C3
-Seed Studio rp2040

• a rotary encoder
• an RGB led
• a boost convertot
• a fan
• an 0.9 inch oled
• Smoke absorbing filter

1. Software

• design a 3D case in fusion
• a simple firmware for the microcontroller

3/27/2026 10:11 PM - Maked the PCB

I did the Smart controller for the fume extractor that contains a rotarry encoder and an OLED and a XIAO rp2040 board that is powerd on by a USB C board

3/27/2026 10:40 PM - Controller 3D

I Did the controller case that makes everything look nice and clean with a cool design, now I am going to do the Filter case for the finnal product :333