beacon bud

this is a project a home made pi zero 2 tool for IT and cybersecurity it is specifically useful in wifi tasks

Tier 2

5 views

0 followers

View Repository No Demo Yet

alexren alexren ⚡🚀 requested changes for beacon bud 4/2/2026 at 7:01 PM ago

hey there! the majority of the cost of this project comes from components you did not design. we can't justifiably fund this, sorry!

manikanta.vasamsetti. added to the journal 3/28/2026 at 7:12 AM ago

render of the image

this is a render of the image of final product. I hope this gets approved fast and i begin the project in fast and successful. waiting for approval of project

manikanta.vasamsetti. submitted beacon bud for ship review 3/27/2026 at 10:04 PM ago

manikanta.vasamsetti. added to the journal 3/27/2026 at 9:44 PM ago

uploaded everything to the repo

uploaded every file to the repo and organized it also verified my cad files
ready to submit for the design review and waiting for the approval https://github.com/0xmanidev/Beacon-Bud

manikanta.vasamsetti. added to the journal 3/27/2026 at 7:53 PM ago

created a fork of pwngotchi to use in my device

i mainly done only little optimization and stability changes while i am in forums they said kali-linux dependencies cause it to break it a lot and also upated the go version and installed a tool called aircrack
these changes are specifically useful for zero 2w
https://github.com/0xmanidev/pwnagotchi-optimized

manikanta.vasamsetti. added to the journal 3/27/2026 at 7:36 PM ago

grinded for 6 hours for back and body parts

successfully designed the back and body part the fusion messed with my mind so much I gone insane at least I completed the design and made the full case I took 6 hours to complete

finally case completed relieved 😴

manikanta.vasamsetti. added to the journal 3/27/2026 at 7:09 PM ago

created the front panel for the case

designed the front panel based on the display we used and ensure that it would fit perfectly and used plastic clips instead of m3 screws because it is way simpler and easy to implement

manikanta.vasamsetti. added to the journal 3/27/2026 at 6:37 PM ago

started desgining case for it

taken dimensions of all the components and started the 3d parts designing in fusion 360 and selected a firmware for it and looked into community forms for inspiration

manikanta.vasamsetti. added to the journal 3/27/2026 at 6:31 PM ago

decided on a battery pack for the project

selected the pi sugar battery hat for the raspberry pi zero 2w (Pisugar2 Portable 1200 mAh UPS Lithium Battery)decided on that because of the pogo pins it is very easy to install

manikanta.vasamsetti. added to the journal 3/27/2026 at 6:25 PM ago

researched with for interface

searched for a way to interact with and decided on e ink display for pi zero 2w and learned some fundamentals in networking and it's a waveshare 2.13 e-paper hat

manikanta.vasamsetti. added to the journal 3/27/2026 at 6:18 PM ago

brainstormed Ideas

looked into many projects that have been already created for inspiration and decided on raspberry pi zero 2w because its the most cost effective option for this project

manikanta.vasamsetti. started beacon bud 3/27/2026 at 6:15 PM ago

3/27/2026 11:48 PM - brainstormed Ideas

looked into many projects that have been already created for inspiration and decided on raspberry pi zero 2w because its the most cost effective option for this project

3/27/2026 11:55 PM - researched with for interface

searched for a way to interact with and decided on e ink display for pi zero 2w and learned some fundamentals in networking and it's a waveshare 2.13 e-paper hat

3/28/2026 12:01 AM - decided on a battery pack for the project

selected the pi sugar battery hat for the raspberry pi zero 2w (Pisugar2 Portable 1200 mAh UPS Lithium Battery)decided on that because of the pogo pins it is very easy to install

3/28/2026 12:07 AM - started desgining case for it

taken dimensions of all the components and started the 3d parts designing in fusion 360 and selected a firmware for it and looked into community forms for inspiration

3/28/2026 12:39 AM - created the front panel for the case

designed the front panel based on the display we used and ensure that it would fit perfectly and used plastic clips instead of m3 screws because it is way simpler and easy to implement

3/28/2026 1:06 AM - grinded for 6 hours for back and body parts

3/28/2026 1:23 AM - created a fork of pwngotchi to use in my device

3/28/2026 3 AM - uploaded everything to the repo

uploaded every file to the repo and organized it also verified my cad files
ready to submit for the design review and waiting for the approval https://github.com/0xmanidev/Beacon-Bud

3/28/2026 12 PM - render of the image

this is a render of the image of final product. I hope this gets approved fast and i begin the project in fast and successful. waiting for approval of project