m0.hid âš¡
approved ch32 bite ago
Tier approved: 2
Grant approved: $203.00
Nice work on this!
chengyin.yao 🚀
added to the journal ago
Got a quote
Cuz why not, got a quote and it's a tad better than jlc. Price censored due to legal stuff I aint taking that risk though. w
chengyin.yao 🚀
submitted ch32 bite for ship review ago
chengyin.yao 🚀
added to the journal ago
Finished everything
Fixed some broken aspects of the panel and figured out how to get quote from JLCPCB.
Also changed offsets in PCB for better clarity n stuff.
Even contacted customer support
chengyin.yao 🚀
added to the journal ago
Finalized the PCB.
Finalized the PCB, added test pads, fixed drc, bom opted.
Also panelized the board as it doesn't increase cost, and improves manufacturing experience..
chengyin.yao 🚀
added to the journal ago
Routed PCB
Finalized schematic
Routed out board- solder mask expansions, outline etc. all is done on nearly a single layer
Followed USB A spec to accommodate for computer ports
chengyin.yao 🚀
added to the journal ago
Finished 90% of the schematic
Drew a few custom symbols, found the optimal ch32 chip with all the needed features and did a heak ton of bom optimizing for this project.
Contemplated between a ton of different versions of the ch32, and drew a couple custom symbols. Also drew a custom footprint
chengyin.yao 🚀
started ch32 bite ago
3/29/2026 - Finished 90% of the schematic
Drew a few custom symbols, found the optimal ch32 chip with all the needed features and did a heak ton of bom optimizing for this project.
Contemplated between a ton of different versions of the ch32, and drew a couple custom symbols. Also drew a custom footprint
3/30/2026 8 AM - Routed PCB
Finalized schematic
Routed out board- solder mask expansions, outline etc. all is done on nearly a single layer
Followed USB A spec to accommodate for computer ports
3/30/2026 8 PM - Finalized the PCB.
Finalized the PCB, added test pads, fixed drc, bom opted.
Also panelized the board as it doesn't increase cost, and improves manufacturing experience..
3/31/2026 - Finished everything
Fixed some broken aspects of the panel and figured out how to get quote from JLCPCB.
Also changed offsets in PCB for better clarity n stuff.
Even contacted customer support
4/8/2026 - Got a quote
Cuz why not, got a quote and it's a tad better than jlc. Price censored due to legal stuff I aint taking that risk though. w