My Fanoos
I will be 3d designing an Egyptian fanoos, a traditional lantern. The base and top lid will be secured using magnets! An electric candle will be in the middle.
Created by
Burst
Tier 5
17 views
0 followers
m0.hid ⚡
approved My Fanoos ago
Tickets awarded: 9 tickets
Tier: 5
Nice work on this lantern! I love the magnetic lid you added, its a really nice touch
Burst
submitted My Fanoos for ship review ago
Burst
added to the journal ago
Cleaned it up and put in the magnets
After I recover the part I fixed it up a bit by using a tool similar to a deburer to smooth the edges. I then used my soldering iron to make the hole a bit bigger for the magnets. Some of them fit perfectly but others not as much. After I finished the base I aligned the magnets so I can see which orientation they should go in and repeated the same process. I found out then that I had one magnet in the wrong orientation so I took it out and fixed it.
CAN ⚡🚀
approved My Fanoos ago
Tier approved: 5
Grant approved: $12.00
Good Job!
Burst
submitted My Fanoos for ship review ago
Shaurya Bisht
requested changes for My Fanoos ago
can you get a more concrete source/answer for how much 3d printing will cost?
Burst
submitted My Fanoos for ship review ago
Burst
added to the journal ago
Added file
I added the missing step file to GitHub. 
I also added a triangle shape around the dome to give it a cool look and texture. Hopefully it gets approved this time!
Shaurya Bisht
requested changes for My Fanoos ago
need files for all pcb/cad files
Burst
submitted My Fanoos for ship review ago
Burst
added to the journal ago
Github+polish
I finished my whole project, lets go!. I added the BOM to github along with multiple pictures. I included a screenshot of the whole screen so you're abele to see my work process on fusion.
Burst
added to the journal ago
Finished and got materials
I finished the whole fanoos and polished it. I added a dome at the top becuase its part of my culture. I added holes for the 3x3 magnets on the base and top so it automatically sticks for easy candle removal. I have like these 
already so I will not be buying it. This goes in the middle!
Burst
added to the journal ago
Almost done
I finished most of the build, I will try to add texture to it. The next step is adding hole and spot for the candle and magnets! I'm still deciding on size
Burst
added to the journal ago
Finished base
I just finished my base. Took a fit of play to get it right. I tried to eliminate as many overhangs as possible. I tried many combinations for a natural look.
Burst
added to the journal ago
Reaserch and planning
I started reaserch some shapes for a fanoos. I tried to focus on ones that have less overhangs and would work with my magnetic top. I chose one with a smaller base that extend up to a hexagonal middle sections. I also researched aliexpress part for magnets so I can emvedd them into the top.
Burst
started My Fanoos ago
11/22/2025 6 PM - Reaserch and planning
I started reaserch some shapes for a fanoos. I tried to focus on ones that have less overhangs and would work with my magnetic top. I chose one with a smaller base that extend up to a hexagonal middle sections. I also researched aliexpress part for magnets so I can emvedd them into the top.
11/22/2025 7:34 PM - Finished base
I just finished my base. Took a fit of play to get it right. I tried to eliminate as many overhangs as possible. I tried many combinations for a natural look.
11/22/2025 7:56 PM - Almost done
I finished most of the build, I will try to add texture to it. The next step is adding hole and spot for the candle and magnets! I'm still deciding on size
11/22/2025 8:40 PM - Finished and got materials
I finished the whole fanoos and polished it. I added a dome at the top becuase its part of my culture. I added holes for the 3x3 magnets on the base and top so it automatically sticks for easy candle removal. I have like these already so I will not be buying it. This goes in the middle!
11/22/2025 8:53 PM - Github+polish
I finished my whole project, lets go!. I added the BOM to github along with multiple pictures. I included a screenshot of the whole screen so you're abele to see my work process on fusion.
11/23/2025 - Added file
I added the missing step file to GitHub.
I also added a triangle shape around the dome to give it a cool look and texture. Hopefully it gets approved this time!
2/22/2026 - Cleaned it up and put in the magnets
After I recover the part I fixed it up a bit by using a tool similar to a deburer to smooth the edges. I then used my soldering iron to make the hole a bit bigger for the magnets. Some of them fit perfectly but others not as much. After I finished the base I aligned the magnets so I can see which orientation they should go in and repeated the same process. I found out then that I had one magnet in the wrong orientation so I took it out and fixed it.