Blueprint

Custom HackPad

Imma make this HackPad in easyEda, For the game Tag 2 3 4 player. Cuz its a good game and lets try to do this!

Created by Shaurya Shaurya

Hackpad

9 views

0 followers

View Repository View Demo

m0.hid m0.hid ⚡ approved Custom HackPad ago

Tickets awarded: 40 tickets

Tier: 4

Great work on this! Nice to see you managed to solder everything in the end

Shaurya Shaurya submitted Custom HackPad for review ago

1Mon 1Mon ⚡ requested changes for Custom HackPad ago

nice job on the hackpad! please upload a final image of your hackpad to your repo and go through https://blueprint.hackclub.com/about/submission-guidelines to ensure your project is ready to go!

Tier: 4

Shaurya Shaurya added to the journal ago

3d Printed, hadda fix smth.

I had to fix the hole size for the base of the inset. So I hadda reprint too. I assembled the board and it is finally complete!

IMG_20260121_203302

What now you wonder, well time to ship! I 3d Printed this with a stronger filament than pla so it doesn't get absolutely demolished.

Shaurya Shaurya submitted Custom HackPad for review ago

Shaurya Shaurya added to the journal ago

Spent a whole flipping 4.5 Hours soldering.

Bruh the LEDs kinda goof. I got trolled so hard. I kept thinking I was ruining the led and thts why they no be working. I have only two LEDs on my MacroPad and they took so long. I used up like 7 LEDs, cuz I thought I kept melting the LEDs or just messing em up. Also the firmware took so long to figure out, Idk why. And one key just doesn't work. Imma spend a bit of time tryna figure out why. But this took so long cuz I kept tryna resolder and stuff :(

IMG_20260118_225704

CAN CAN ⚡🚀 approved Custom HackPad ago

Nice hackpad

Shaurya Shaurya submitted Custom HackPad for review ago

PenguinMo PenguinMo requested changes for Custom HackPad ago

you're missing the fully assembeled CAD photo

Shaurya Shaurya submitted Custom HackPad for review ago

zsharpminor zsharpminor requested changes for Custom HackPad ago

Hi! I love your design; could you please include some more images of your pcb, most notably your PCB design in KiCad/your EDA software, as well as a 3d render of the PCB if possible? Additionally, you're missing a fully assembled CAD image of all of your components together, and your files are a bit unorganized - please put them into PCB, CAD, and Firmware folders :) Finally, we need your KMK/QMK code for your project to be eligible (add it to a Firmware folder). Thanks!

Shaurya Shaurya submitted Custom HackPad for review ago

nimit nimit 🚀 requested changes for Custom HackPad ago

Nice work but could you organize the repo and add a list of all the parts you need from the kit? Also, use step files for cad and make a firmware please!

Shaurya Shaurya submitted Custom HackPad for review ago

Shaurya Shaurya started Custom HackPad ago

1/18/2026 - Spent a whole flipping 4.5 Hours soldering.

Bruh the LEDs kinda goof. I got trolled so hard. I kept thinking I was ruining the led and thts why they no be working. I have only two LEDs on my MacroPad and they took so long. I used up like 7 LEDs, cuz I thought I kept melting the LEDs or just messing em up. Also the firmware took so long to figure out, Idk why. And one key just doesn't work. Imma spend a bit of time tryna figure out why. But this took so long cuz I kept tryna resolder and stuff :(

IMG_20260118_225704

1/21/2026 - 3d Printed, hadda fix smth.

I had to fix the hole size for the base of the inset. So I hadda reprint too. I assembled the board and it is finally complete!

IMG_20260121_203302

What now you wonder, well time to ship! I 3d Printed this with a stronger filament than pla so it doesn't get absolutely demolished.