Tony's DEV-Board
Following the Dev-board Tutorial and making a cool case for it
Created by
Tony
Tier 3
8 views
0 followers
Timeline
CAN ⚡🚀
approved Tony's DEV-Board ago
Tier approved: 3
Grant approved: $29.00
Nice project
Tony
submitted Tony's DEV-Board for review ago
Iamalive ⚡🚀
requested changes for Tony's DEV-Board ago
Your BOM.csv should be a file, not a link to a seperate google sheets file! Please fix and resubmit
Tony
submitted Tony's DEV-Board for review ago
1Mon
requested changes for Tony's DEV-Board ago
please make sure your bom.csv is easily accessible in your repo! there are a ton of .stl files its hard to find anything
Tony
submitted Tony's DEV-Board for review ago
Iamalive ⚡🚀
requested changes for Tony's DEV-Board ago
Where is cart screenshot with your devboard? Please attach it and resubmit
Tony
submitted Tony's DEV-Board for review ago
technical_.
requested changes for Tony's DEV-Board ago
Returned due to updated shipping costs reflecting in another project of yours.
Tony
submitted Tony's DEV-Board for review ago
Tony
added to the journal ago
Finished CAD
Built a case around the devboard with two peg-holes. Thanks to my last project( the USB-HUB), I was able to use what I learned from that and apply it to the schematic and sketches, which felt a lot easier to make this time. The plan is to use nail glue and apply it to the prints together when assembling (and not drop any on the circuit board). I think it looks pretty cool with my name on the side with peg holes and the "Grill" type structure on the back (both of which were made using the default typing feature script ):) I'm going to try and finish up the repo and submit tonight. Right now, I have completed the BOM, CAD, PCB, and I can't really think of what else I need to submit other than a good-looking repo atm
Tony
added to the journal ago
BOM done, and more
Finished my BOM and sourced all my parts from LCSC, which is very nice. I'll start on CAD right after I finish this journal. I asked some friends, and I think I'll make the board black because that looks pretty cool (I think I'll go with blue, though). The plan for the case is to leave the header pins exposed & the button, add some sort of personalization, and find a way to make it a keychain or look somewhat reasonable to put on one.
Tony
added to the journal ago
I LOVE DARK-MODE KICAD
anyways during last nights lock-in call i was able to start-finish- and add footprints to my schematic, and even started working on the footprint adding in the pcb editor / wiring traces :D. But after i went to sleep and woke up it looked realllllly bad so i redid the entire thing and it looks so much better (compared to what it was) Im gonna Cad a case for it now and maybe get a friend to render it if possible, having this on a key chain would be rly cool 
Tony
added to the journal ago
Started schematic
Started following the Dev-board tutorial. In my opinion, it looks really cool, and I hope I don't mess up the wiring too badly while making it. Hope to finish the schematic during the lock-in call and perhaps get the case done today as well. Perhaps I could even try and make it into a keychain.
Tony
started Tony's DEV-Board ago