12/3/2025 - Researchhh!

During this couple days i started doing research and some sketches about the phone stand, and i had one thinkg clear, I didn't want it to be boring, and that I wante it to be able to print without supports, sou in base of that I started sketching how it can be, the ideas varied, from a planetary gear to a custom gearbos, but a the end only one was the winner

Insipired in a gear ish mechanism I created and protoyped a system to join things, (like a hinge with screw and a nut) making it able to rotate and lock in place now i just need to design in fusion and prototype it a little bit more hehe

Propotype of the hinge

12/5/2025 - The design is doneeeeee

After a lot of time (I have been busy doing the splitkeyboard project) the phone stand is finally readyyy, with some help from my drafting teacher, I managed to make it full modular, thereofre, it can be printed without supports, I will start printing as soon as I can.

c:

I first started with a plain sketch then degisn the notch that will keep everything together

After that i created the bolt and the nut,

Then design the arm of the phone stand

After the arm then it was time to design the actual thing that will hold the phone

And just like that and some more tolerance updates the design was done!!!

2/2/2026 - Printed the parts

After what felt like an eternity finally i was able to print all the parts that i needed, it took so long because i had an specific color in mind, army green ish, so after ordeing it and waiting it finally came, and therefore i could finally print it!

2/19/2026 - make the instrucions file

today work was mostly housekeeping, create and upload the model to nexprint, and create the instructions file, took pictures of the model and upload them to the repo!