cubit010 ⚡
added to the journal ago
soldering headers
still kinda suck at soldering so theres a lot more solder on the pins than needed
Aligning the headers properly and straight took a lot of time because the first time i did it it was slanted for one of the 1x20
CAN ⚡🚀
approved custom devboard ago
Tier approved: 3
Grant approved: $42.00
nice project
cubit010 ⚡
submitted custom devboard for ship review ago
1mon ⚡
requested changes for custom devboard ago
please add a readme to your project! check the project submission guidelines. also please get only 2 boards pcba'd
cubit010 ⚡
submitted custom devboard for ship review ago
cubit010 ⚡
added to the journal ago
finalizing looks of silkscreen
added some silkscreen branding/art
looks very noice will submit soon
gotta figure out how to export everything again and all
kinda painful experience having to zoom in a lot in the tutorial at times but interesting to learn
cubit010 ⚡
added to the journal ago
finalized routing AHHHHHHHHHH
painful trying to fix all errors in the DRC, had to add a million vias bc of my terrible routing
had to redo the usb d+- pairs because i didn't realize the courtyards were touching the first time i placed and wired them up soooooo had to redo that and re adjust the capacitors around it as well for everything to fit together
cubit010 ⚡
added to the journal ago
routing PCB
the struggle do be real to figuring out how to properly route stuff
especially the diff pairs trying to get it working was a pain
besides that we're almost done which is noice
cubit010 ⚡
added to the journal ago
Made schematic
Finished schematic, and pinned the board differently compared to the demo / default rasp pi pico layout
it should work in a similar way, but this board I also added back the gpio 25 by removing one of the gnd pins
cubit010 ⚡
started custom devboard ago
12/2/2025 11 AM - Made schematic
Finished schematic, and pinned the board differently compared to the demo / default rasp pi pico layout
it should work in a similar way, but this board I also added back the gpio 25 by removing one of the gnd pins
12/2/2025 10 PM - routing PCB
the struggle do be real to figuring out how to properly route stuff
especially the diff pairs trying to get it working was a pain
besides that we're almost done which is noice
12/3/2025 10 AM - finalized routing AHHHHHHHHHH
painful trying to fix all errors in the DRC, had to add a million vias bc of my terrible routing
had to redo the usb d+- pairs because i didn't realize the courtyards were touching the first time i placed and wired them up soooooo had to redo that and re adjust the capacitors around it as well for everything to fit together
12/3/2025 11 AM - finalizing looks of silkscreen
added some silkscreen branding/art
looks very noice will submit soon
gotta figure out how to export everything again and all
kinda painful experience having to zoom in a lot in the tutorial at times but interesting to learn
1/3/2026 - soldering headers
still kinda suck at soldering so theres a lot more solder on the pins than needed
Aligning the headers properly and straight took a lot of time because the first time i did it it was slanted for one of the 1x20