Soldered the parts

Hi! Nice project! Two things - your schematic show the OLED's SCL and SDA pins connecting to A0 and A1 on the MCU - could you please connect them to the designated SCL and SDA pins on the MCU? Additionally, you're using the wrong footprint for your MCU (SMD instead of DIP), which won't work as you're hand-soldering. Finally, please add holes in your case so that the LEDs can shine through (unless you want them to be hidden for eternity). Your "firmware" file does not have an extension and your folders don't follow the format - PCB, CAD, and Firmware folders are preferred. Thanks!

looks good except for one thing, please put in the stl of the pcb inside the 3d case. just that one render needs to be fixed

Please make a 3d printed case and add a photo to the readme

Hello! I love the amount of detail you put into your files, however, it is a bit hard to scroll through and actually read. The readme should also be formatted nicer with CAD assembly. Its a bit hard to read right now. For example, firmware code does not need to be in the ReadME. Also, please use .step! good job on doom :)