Magnetic Stirrer
A magnetic stirrer that stirs water. This is designed to be as cheap as possible to make, so it's all aliexpress parts and 3d printed.
Created by
itsme 🚀
Tier 5
9 views
0 followers
CAN ⚡🚀
approved Magnetic Stirrer ago
Tier approved: 5
Grant approved: $22.00
itsme 🚀
submitted Magnetic Stirrer for ship review ago
Kai the Jolly Guy 🚀
requested changes for Magnetic Stirrer ago
Your project looks AMAZING :DDD Could you just find some cheaper magnets and then I can get this approved for ya!
itsme 🚀
submitted Magnetic Stirrer for ship review ago
Kai the Jolly Guy 🚀
requested changes for Magnetic Stirrer ago
Hey there! Thanks for making it clear what goes where :D Could you please measure and model your beaker in to show your model more accurately. You also just can't put a beaker ontop of a motor, so you need to model in a way for it to sit!
itsme 🚀
submitted Magnetic Stirrer for ship review ago
Kai the Jolly Guy 🚀
requested changes for Magnetic Stirrer ago
Thanks for adding the 3D models :D I'm still a bit confused though because if you pour the liquid in, it'll be liquid in direct contact with your electronics which will fry them! Make sure you have a complete 3D model ;)
itsme 🚀
submitted Magnetic Stirrer for ship review ago
itsme 🚀
added to the journal ago
Make onshape assembly
Everything is assembled now in the onshape assembly. Also i added the onshape assembly to the readme in the github repo.
Kai the Jolly Guy 🚀
requested changes for Magnetic Stirrer ago
Sick idea :D Could you please add your 3D models of your electronics into your CAD model to show how they'll all fit in!
itsme 🚀
submitted Magnetic Stirrer for ship review ago
itsme 🚀
added to the journal ago
Make 3D model for container to put everything in
It wasn't too difficult since the project is pretty simple, but I had to make the hole pretty big since I've had a lot of trouble in the past with holes for usb being too small, so now it's pretty tiny. also, there's no lid since a lid would make it basically impossible to do anything without taking everything apart, and i'll probably just superglue a layer of aluminium on it. (aluminium cuz it can't be magnetic).
itsme 🚀
added to the journal ago
Make electrical and assembly related drawings
I made an image for the electrical stuff with cirkit designer and a concept of the assembly with excalidraw. I think all the components in the electrical drawing are the exact same except for the motor. Next thing I'll do is make some 3d files to act as a case.
itsme 🚀
added to the journal ago
Make a BOM(b)
Find some aliexpress parts to use for magnetic stirrer. I'm not gonna make my own pcb for this since its a pretty simple project. This project should only use aliexpress parts so that its cheap. IDK what else to put in this entry: aaaaaaaaaaaaaaaaaaa
itsme 🚀
started Magnetic Stirrer ago
10/11/2025 - Make a BOM(b)
Find some aliexpress parts to use for magnetic stirrer. I'm not gonna make my own pcb for this since its a pretty simple project. This project should only use aliexpress parts so that its cheap. IDK what else to put in this entry: aaaaaaaaaaaaaaaaaaa
11/6/2025 5 PM - Make electrical and assembly related drawings
I made an image for the electrical stuff with cirkit designer and a concept of the assembly with excalidraw. I think all the components in the electrical drawing are the exact same except for the motor. Next thing I'll do is make some 3d files to act as a case.
11/6/2025 6 PM - Make 3D model for container to put everything in
It wasn't too difficult since the project is pretty simple, but I had to make the hole pretty big since I've had a lot of trouble in the past with holes for usb being too small, so now it's pretty tiny. also, there's no lid since a lid would make it basically impossible to do anything without taking everything apart, and i'll probably just superglue a layer of aluminium on it. (aluminium cuz it can't be magnetic).
11/7/2025 - Make onshape assembly
Everything is assembled now in the onshape assembly. Also i added the onshape assembly to the readme in the github repo.