Adrian's HackPad (KeyPad)
Simple HackPad for multitasking that contains a volume knob :D
Created by
secretaditzu78
Hackpad
12 views
0 followers
m0.hid ⚡
approved Adrian's HackPad (KeyPad) ago
Tickets awarded: 60 tickets
Tier: 4
Great work on this hackpad, I love the lighting!
secretaditzu78
added to the journal ago
Firmware Build 4
Added small firmware patches to the integrated LED
- LED now fades when changed tabs
- LED small flashes when knob volume up
- LED small fade out when knob volume down
- Buzzer patches
secretaditzu78
submitted Adrian's HackPad (KeyPad) for ship review ago
secretaditzu78
added to the journal ago
Got the 3D case and asambled everything
I got the 3D case for my hackpad, I putted a small cartboard under the pcb because it was too down, and I puted some antistatic pads under the screws, and a translucent sheet at the microcontroller hole so the tab light is more shinyyy
secretaditzu78
added to the journal ago
Finnished putting the components on the pcb
So I did finnished putting the components on the pcb and realised i wired the adressable leds wrong, and choose the wrong footprint so no rgb on the sides, i don t care anyway, but in rest all is working good
i did a little firmware changes that i will realease soon on git
Aw yea if it matters i pad a TVA fee of 3$ but is fine
secretaditzu78
added to the journal ago
Got the PCB/s from JLC PCB
Got the boards from JLC PCB!
Now I wait for the Kit and the 3D prints to arrive,thanks a lotttttttttttttttttttttttttttt
tt , i'm so happyyyyyyyyyyyyyyyyyyyyyyy!!!!
CAN ⚡🚀
approved Adrian's HackPad (KeyPad) ago
Nice hackpad
secretaditzu78
submitted Adrian's HackPad (KeyPad) for ship review ago
Shaurya Bisht
requested changes for Adrian's HackPad (KeyPad) ago
no change since last review
secretaditzu78
submitted Adrian's HackPad (KeyPad) for ship review ago
Shaurya Bisht
requested changes for Adrian's HackPad (KeyPad) ago
please add an image of your case in your readme that has the pcb in it and the top closed as well. also if you wrote the readme with ai please write it yourself
Adrian's HackPad (KeyPad) was submitted for review ago
secretaditzu78
started Adrian's HackPad (KeyPad) ago
1/21/2026 - Got the PCB/s from JLC PCB
Got the boards from JLC PCB!
Now I wait for the Kit and the 3D prints to arrive,thanks a lotttttttttttttttttttttttttttt
tt , i'm so happyyyyyyyyyyyyyyyyyyyyyyy!!!!
1/24/2026 - Finnished putting the components on the pcb
So I did finnished putting the components on the pcb and realised i wired the adressable leds wrong, and choose the wrong footprint so no rgb on the sides, i don t care anyway, but in rest all is working good
i did a little firmware changes that i will realease soon on git
Aw yea if it matters i pad a TVA fee of 3$ but is fine
2/21/2026 2 PM - Got the 3D case and asambled everything
I got the 3D case for my hackpad, I putted a small cartboard under the pcb because it was too down, and I puted some antistatic pads under the screws, and a translucent sheet at the microcontroller hole so the tab light is more shinyyy
2/21/2026 6 PM - Firmware Build 4
Added small firmware patches to the integrated LED
- LED now fades when changed tabs
- LED small flashes when knob volume up
- LED small fade out when knob volume down
- Buzzer patches