darsh 🚀
added to the journal ago
startstart
making this quadruped inspired by https://www.youtube.com/watch?v=8s9TjRz01fo (cara)
cara uses 8 eaglepower bldc motors forming 4 rope-based actuators along with one extra turn that allows 3DOF on each leg, and a lightweight frame. this allows it to be quiet, very smooth-moving, and quite flexible. it weighs 31lbs while being mostly 3d-printed and measures 24.82×17.98×16.83in. the cost of cara is 3300USD.
the aim of psidog is to be similar in functionality to this, while costing maximum $800. the bulk of cara's cost was in its motors and esc, and so to achieve this i will use significantly cheaper motors and knockoff odrive s1 escs. by getting motors at max $40 per and escs at ~30$ per, i will have $240 left over for all other parts, which should be enough.
links that are important:
cara writeup: https://www.aaedmusa.com/projects/cara
quadruped leg design: www.researchgate.net/figure/PA-driven-Cheetah1-and-Cheetah2-mechanical-leg-PA-proprioceptive-actuator_fig22_332924140
MIT mini cheetah DIY: https://www.instructables.com/3D-Printed-QDD-Robotic-Actuator-MIT-Mini-Cheetah-C/
hard to find parts:
esc: https://www.aliexpress.com/item/1005007797279955.html
dyneema dm-20: https://lanexyachtingusa.com/products/100-dyneema-dm-20-plate
at-a-glance motor option: https://www.aliexpress.com/item/1005007009152149.html

darsh 🚀
started Psidog ago
12/21/2025 - startstart
making this quadruped inspired by https://www.youtube.com/watch?v=8s9TjRz01fo (cara)
cara uses 8 eaglepower bldc motors forming 4 rope-based actuators along with one extra turn that allows 3DOF on each leg, and a lightweight frame. this allows it to be quiet, very smooth-moving, and quite flexible. it weighs 31lbs while being mostly 3d-printed and measures 24.82×17.98×16.83in. the cost of cara is 3300USD.
the aim of psidog is to be similar in functionality to this, while costing maximum $800. the bulk of cara's cost was in its motors and esc, and so to achieve this i will use significantly cheaper motors and knockoff odrive s1 escs. by getting motors at max $40 per and escs at ~30$ per, i will have $240 left over for all other parts, which should be enough.
links that are important:
cara writeup: https://www.aaedmusa.com/projects/cara
quadruped leg design: www.researchgate.net/figure/PA-driven-Cheetah1-and-Cheetah2-mechanical-leg-PA-proprioceptive-actuator_fig22_332924140
MIT mini cheetah DIY: https://www.instructables.com/3D-Printed-QDD-Robotic-Actuator-MIT-Mini-Cheetah-C/
hard to find parts:
esc: https://www.aliexpress.com/item/1005007797279955.html
dyneema dm-20: https://lanexyachtingusa.com/products/100-dyneema-dm-20-plate
at-a-glance motor option: https://www.aliexpress.com/item/1005007009152149.html
