Again, your case should be properly aligned so the switches line up with the cutouts. Right now the switches on the PCB aren't centered horizontally so the switches will not fit inside.

This looks great but in the HACKGERS ASSEMBLE.step file none of the holes seem to line up? (img) This might be an issue with this particular file though because I see that in your readme this is fine. The other thing with the assembly is that the switches aren't quite aligned with the plate. The 'shoulders' of the switch should rest on top of the plate instead of how it is currently down inside the case. (it should be like this (img))
One more thing is that once the PCB is at the proper distance from the plate, the encoder base (the rectangular bottom part) will hit the plate. You can fix this by using a 14x14mm square instead of the circular hole.

Keep it up!

Really cool hackpad! Could you please include a render of your hackpad in its case with 3D models of all of its components? Thanks!

Hi, please fix the previous feedback. Your image is still glitched and you have no folders. Thanks!

looks great thanks for following feedback. two things: put files into organized folders, and fix the readme to have all the images and text render properly (seems like theres a glitched image right now)

please organize folders, also needs .step files as well not .stl. also should have an image with the top and bottom case with a pcb inside both of them enclosed. how are you going to attach the bottom and top parts? presumably holes for screws