RGB Cloud
RGB Clouds on Ceiling and Wall to decorate my Room. Cuz Why Not? Gamerry Vibes ig
Created by
sanoojes
Tier 2
31 views
0 followers
Shaurya Bisht
requested changes for RGB Cloud ago
no design files and no repo?
sanoojes
submitted RGB Cloud for ship review ago
sanoojes
added to the journal ago
Project Previews
I didnt do the projects but here are some of the inspiration/previews for the project its just to make the project preview/thumbnail better, cuz why not, i think its a cool project to do.
These images are not mine, Its for showing what I intend to create.
sanoojes
added to the journal ago
Fix the BOM, Decide program to use to drive the RGBs
Ok am dumb enough to skip the wires, fuses and Glue for the PolyFill, also why do i need 10kg of PolyFill lol gotta change it to 5 or something.
So i added Wires, Fuse, Fuse Holder and Sleeves for the wire for making the wires look good, i would like to get white sleeve for the wires, but it will probably yellow/get dirt so quickly
Speaking of Dirt, i have no idea how i will clean the Cotton Fills, i think i can probably get the Foam sheets out and shake or something.
Also i need a good Glue for sticking the PolyFill to the foam sheet, i think i will use adhesive spray but that will be probably a dumb idea because it will attract the dust quickly, so i opted for using the Hot Glue as i have a Hot Glue gun laying around (i think it will probably work), for the hot glue i opted for 36 pack hot glue sticks which was only 290rs, i think its cheap as it gets, also i Don't know if i need 72 glue sticks, but i think there will be so much polyfill to stick to.
Alsoooooo, i need a to figure out the firmware? code? or smart home solution that i will use.
i think i will use the HomeAssistant.io as it has WLED integration to use WLED to drive the LEDs, as its better to integrate the stuff into one.
sanoojes
added to the journal ago
Project Planing
Started research on the RGB Cloud setup
What am i planing ?
A simple rgb cloud setup like in online videos
Something like
Why am i doing this ?
Room decoration and cool vibes
Bill of materials
https://docs.google.com/spreadsheets/d/1OJPtkw0SCkZNgRojZ8LpgQu2vuTfVBWPjUPChstTOQI/
CSV for the nerds attached on gist
https://gist.github.com/sanoojes/bbc48ae3c5910d1b56d3f5b050d1849d
Totaling a 178USD. Which i think is reasonable for a wall + small ceiling area where my Laptop sits.
Some notes:
- I think i can source Fiber fill and Foam sheets offline for much less price but idk if HCB cards work with local vendors and they might not be able to process the transactions, but i will try to checkout them if possible.
- I don't think i need a GitHub Repository for this as its explainable by the journal and a GitHub Gist, soo idk.
sanoojes
started RGB Cloud ago
12/29/2025 - Project Planing
Started research on the RGB Cloud setup
What am i planing ?
A simple rgb cloud setup like in online videos
Something like
Why am i doing this ?
Room decoration and cool vibes
Bill of materials
https://docs.google.com/spreadsheets/d/1OJPtkw0SCkZNgRojZ8LpgQu2vuTfVBWPjUPChstTOQI/
CSV for the nerds attached on gist
https://gist.github.com/sanoojes/bbc48ae3c5910d1b56d3f5b050d1849d
Totaling a 178USD. Which i think is reasonable for a wall + small ceiling area where my Laptop sits.
Some notes:
- I think i can source Fiber fill and Foam sheets offline for much less price but idk if HCB cards work with local vendors and they might not be able to process the transactions, but i will try to checkout them if possible.
- I don't think i need a GitHub Repository for this as its explainable by the journal and a GitHub Gist, soo idk.
12/30/2025 2:07 AM - Fix the BOM, Decide program to use to drive the RGBs
Ok am dumb enough to skip the wires, fuses and Glue for the PolyFill, also why do i need 10kg of PolyFill lol gotta change it to 5 or something.
So i added Wires, Fuse, Fuse Holder and Sleeves for the wire for making the wires look good, i would like to get white sleeve for the wires, but it will probably yellow/get dirt so quickly
Speaking of Dirt, i have no idea how i will clean the Cotton Fills, i think i can probably get the Foam sheets out and shake or something.
Also i need a good Glue for sticking the PolyFill to the foam sheet, i think i will use adhesive spray but that will be probably a dumb idea because it will attract the dust quickly, so i opted for using the Hot Glue as i have a Hot Glue gun laying around (i think it will probably work), for the hot glue i opted for 36 pack hot glue sticks which was only 290rs, i think its cheap as it gets, also i Don't know if i need 72 glue sticks, but i think there will be so much polyfill to stick to.
Alsoooooo, i need a to figure out the firmware? code? or smart home solution that i will use.
i think i will use the HomeAssistant.io as it has WLED integration to use WLED to drive the LEDs, as its better to integrate the stuff into one.
12/30/2025 2:14 AM - Project Previews
I didnt do the projects but here are some of the inspiration/previews for the project its just to make the project preview/thumbnail better, cuz why not, i think its a cool project to do.
These images are not mine, Its for showing what I intend to create.