Watch Band
A replacement watch band for my smartwatch (works with any watch with 22mm standard lugs)
Created by
Simha Saraswati
Tier 5
2 views
0 followers
Iamalive 🚀
approved Watch Band ago
Tier approved: 5
Grant approved: $8.00
Nice project!
Simha Saraswati
submitted Watch Band for review ago
technical_.
requested changes for Watch Band ago
Your cart screenshots must also show the product, not just a total.
Simha Saraswati
submitted Watch Band for review ago
Iamalive 🚀
requested changes for Watch Band ago
Please include the cost of https://www.crownandbuckle.com/spring-bars-22mm.html?srsltid=AfmBOopJ-fi_sSpFwpsD-9YkPvLDZjwOFGY5owCn-aTt37ZjSEfsiyu4 as well! As it stands you'll only get funding for your shipping :p
Simha Saraswati
submitted Watch Band for review ago
technical_.
requested changes for Watch Band ago
Cart screenshots must be a screenshot from the manufacturer's webpage or a invoice. It cannot just be a DM.
Simha Saraswati
submitted Watch Band for review ago
Simha Saraswati
added to the journal ago
Finished the other band
Today I finished the other side of the band and the leftover holder.
This was the one with the holes on it, so i replicated the other design and modified it to fit this one
.
I chose the style so it doesn't explicitly look like the holes, and blends in with the rest of the design while still being functionable. I also made the leftover holder that just clasps anything left of the band down so it doesn't go all over the place.
Simha Saraswati
added to the journal ago
Created one side of the watch band
Today, I created one side of my watch band.
This watch band is meant to be printed in flexible (TPU/TPE) filament so I did not bother with a articulated design with hard filament. I made holes in similar style to the apple watch band for breathability. I made this watch band simpler then most silicone bands by instead of having a more complicated fastener, opting for a simpler through hole one (basically a stick on one side pops into a hole on the other which keeps it together). The one I made today was the stick part so I will probably make the holes part later.
Simha Saraswati
started Watch Band ago
12/31/2025 - Created one side of the watch band
Today, I created one side of my watch band.
This watch band is meant to be printed in flexible (TPU/TPE) filament so I did not bother with a articulated design with hard filament. I made holes in similar style to the apple watch band for breathability. I made this watch band simpler then most silicone bands by instead of having a more complicated fastener, opting for a simpler through hole one (basically a stick on one side pops into a hole on the other which keeps it together). The one I made today was the stick part so I will probably make the holes part later.
1/1/2026 - Finished the other band
Today I finished the other side of the band and the leftover holder.
This was the one with the holes on it, so i replicated the other design and modified it to fit this one
.
I chose the style so it doesn't explicitly look like the holes, and blends in with the rest of the design while still being functionable. I also made the leftover holder that just clasps anything left of the band down so it doesn't go all over the place.