Christmas tree shaped LED lamp!
This a battery-powered Christmas tree shaped LED lamp!
Created by
Naytik
Tier 4
4 views
0 followers
Iamalive 🚀
approved Christmas tree shaped LED lamp! ago
Tier approved: 4
Grant approved: $51.00
Nice project!
Naytik
submitted Christmas tree shaped LED lamp! for review ago
Iamalive 🚀
requested changes for Christmas tree shaped LED lamp! ago
Your project looks great! Just one final thing - for the cart from this screenshot(https://blueprint.f8d710a55cb9b516d88635f103c2c9f2.r2.cloudflarestorage.com/hhs8v6qknvrv40jp3pmskt06exl2?response-content-disposition=inline%3B%20filename%3D%22Screenshot%202026-01-04%20082731.png%22%3B%20filename%2A%3DUTF-8%27%27Screenshot%25202026-01-04%2520082731.png&response-content-type=image%2Fpng&X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=b27cbf3ecad4135891e6187077206c69%2F20260104%2Fauto%2Fs3%2Faws4_request&X-Amz-Date=20260104T143621Z&X-Amz-Expires=604800&X-Amz-SignedHeaders=host&X-Amz-Signature=4118a3a3b7c34d8642fd0ab7262a7825dcf218f64d5819cf91f62498d97233e8), can you change the shipping option to global standard direct/the cheapest one possible? If it already is, please note that in the "note to reviewer" section!
Naytik
submitted Christmas tree shaped LED lamp! for review ago
Shaurya Bisht
requested changes for Christmas tree shaped LED lamp! ago
need to see all the items in the cart in your second cart screenshot as well so maybe just add another ss, also bom and funding req doesnt match up
Naytik
added to the journal ago
Created the BOM and rerouted the first PCB
I created the BOM which contains 12 components from Digikey with a total price of $12.88 however because they are shipping from the US shipping alone is $40.20,
I also had to reroute the entirety of the PCB as the first version would have cost me 29$, However after resizing and rerouting I was able to get the price down to about 4$
In total of both the PCBs including shipping the price is about $7.50
This gives me a final price of $47.50 hopefully making this a tier 3 project!
Naytik
submitted Christmas tree shaped LED lamp! for review ago
Naytik
added to the journal ago
Finished Case
I finished the Case, both parts, The bottom part of the case is really similar even using the same heatset inserts however the top part now has a slit cut into it which is where the tree docks and is connected to the PCB below via wires.
Naytik
added to the journal ago
Routed the PCB
After about 2 hours of work, I completely routed the PCB(s), yes there are 2 and made it in the shape of a christmas tree! The Circular PCB is the base with the switch, 555 timer and Battery while all the LEDS are on the other christmas tree shaped PCB, There are test point pads which I will use to link connect the 2 PCB's together
Naytik
added to the journal ago
Finished the Schematics
So, after about 15 minutes of designing the lamp, I have decided to use a very simple circuit only composed of a few LEDs and a battery and 555 timer IC, a few capacitors and resistors. Cleverly hidden in the base is the 9V battery, Another design feature is that the Christmas tree will be represented through the shape of the exposed PCB and the green silkscreen layer.
Below is a picture of my schematics for this project which I have just completed!
Naytik
started Christmas tree shaped LED lamp! ago
1/1/2026 12 PM - Finished the Schematics
So, after about 15 minutes of designing the lamp, I have decided to use a very simple circuit only composed of a few LEDs and a battery and 555 timer IC, a few capacitors and resistors. Cleverly hidden in the base is the 9V battery, Another design feature is that the Christmas tree will be represented through the shape of the exposed PCB and the green silkscreen layer.
Below is a picture of my schematics for this project which I have just completed!
1/1/2026 4 PM - Routed the PCB
After about 2 hours of work, I completely routed the PCB(s), yes there are 2 and made it in the shape of a christmas tree! The Circular PCB is the base with the switch, 555 timer and Battery while all the LEDS are on the other christmas tree shaped PCB, There are test point pads which I will use to link connect the 2 PCB's together
1/1/2026 5 PM - Finished Case
I finished the Case, both parts, The bottom part of the case is really similar even using the same heatset inserts however the top part now has a slit cut into it which is where the tree docks and is connected to the PCB below via wires.
1/2/2026 - Created the BOM and rerouted the first PCB
I created the BOM which contains 12 components from Digikey with a total price of $12.88 however because they are shipping from the US shipping alone is $40.20,
I also had to reroute the entirety of the PCB as the first version would have cost me 29$, However after resizing and rerouting I was able to get the price down to about 4$
In total of both the PCBs including shipping the price is about $7.50
This gives me a final price of $47.50 hopefully making this a tier 3 project!