Simple Weather Station
Easy and quick weather station. Without a case because I don’t have a 3D printer yet haha.. WIHOUT CASE
Created by
Jadamek1337
Tier 4
40 views
0 followers
alexren ⚡🚀
requested changes for Simple Weather Station ago
hey there! your project is incomplete - please go through https://blueprint.hackclub.com/about/submission-guidelines again and tick off each item individually; you are missing things listed there.
Jadamek1337
submitted Simple Weather Station for ship review ago
Jadamek1337
added to the journal ago
CAD CASE INFORMATION
n terms of the case/CAD design, I do not want to add this; I want to leave the project completed as it is. I previously mentioned that it would be without a case, so this is the end of the project. .;)
Jadamek1337
added to the journal ago
Made Schematic
I made schematic for this project. made it on paper because why not :) last step is to make the 3D view of case. i want to add that i wont add any case because i dont want and its just a prototype
zsharpminor
requested changes for Simple Weather Station ago
Hello there, while this is a wonderful project, you're missing quite a few things outlined in our https://blueprint.hackclub.com/about/submission-guidelines. It looks like the repository is currently missing an image of your wiring diagram / circuit schematics, and a CAD case - please make one for this project to be approvable. Please resubmit this project once you've addressed these issues. Thanks!
m0.hid ⚡
submitted Simple Weather Station for ship review ago
CAN ⚡🚀
submitted Simple Weather Station for ship review ago
Jadamek1337
submitted Simple Weather Station for ship review ago
Jadamek1337
added to the journal ago
The End
I fixed everything and left the project finished. That’s the end. It’s a very cool and interesting little project—I really like it. There was a lot of programming involved, and it taught me a lot. I think it’s a pretty cool and fairly advanced project, even though it’s on a breadboard, and I don’t want to change that because it would just be overkill. Thank you. Additionaly i added some fresh code 
Jadamek1337
added to the journal ago
Stupid Idea
I decided that maybe I would solder it onto a PCB. That was a tragic idea. I forgot the pinout on my USB, and the solder joints came out really weird. I couldn’t disconnect them, and luckily only the ESP32 was damaged.
Jadamek1337
added to the journal ago
Final Prototype
I came up with the idea to add a button and a DHT sensor to it. I added them, and this is what the final prototype looked like. Everyting worked perfectly
Jadamek1337
added to the journal ago
Idea and first stage
I came up with the idea to make a weather station based on an ESP32. It will connect to the internet and have three LEDs: green when it’s working, red when there’s an error or no internet connection, and blue when it’s connected to the internet. I’m building it on a breadboard because soldering would be overkill lol. The data will be fetched from a free API on the internet. The ESP32 will connect to my home Wi-Fi. And i will see data on my oled screen
Jadamek1337
started Simple Weather Station ago
1/1/2026 2:38 PM - Idea and first stage
I came up with the idea to make a weather station based on an ESP32. It will connect to the internet and have three LEDs: green when it’s working, red when there’s an error or no internet connection, and blue when it’s connected to the internet. I’m building it on a breadboard because soldering would be overkill lol. The data will be fetched from a free API on the internet. The ESP32 will connect to my home Wi-Fi. And i will see data on my oled screen
1/1/2026 2:39 PM - Final Prototype
I came up with the idea to add a button and a DHT sensor to it. I added them, and this is what the final prototype looked like. Everyting worked perfectly
1/1/2026 2:40 PM - Stupid Idea
I decided that maybe I would solder it onto a PCB. That was a tragic idea. I forgot the pinout on my USB, and the solder joints came out really weird. I couldn’t disconnect them, and luckily only the ESP32 was damaged.
1/1/2026 2:47 PM - The End
I fixed everything and left the project finished. That’s the end. It’s a very cool and interesting little project—I really like it. There was a lot of programming involved, and it taught me a lot. I think it’s a pretty cool and fairly advanced project, even though it’s on a breadboard, and I don’t want to change that because it would just be overkill. Thank you. Additionaly i added some fresh code
1/27/2026 8:47 AM - Made Schematic
I made schematic for this project. made it on paper because why not :) last step is to make the 3D view of case. i want to add that i wont add any case because i dont want and its just a prototype
1/27/2026 8:52 AM - CAD CASE INFORMATION
n terms of the case/CAD design, I do not want to add this; I want to leave the project completed as it is. I previously mentioned that it would be without a case, so this is the end of the project. .;)