Iamalive 🚀
approved USBC passkey ago
Tier approved: 4
Grant approved: $35.00
Great project! Just one thing I will say though - next time try to add something like firmware/code so you spent more time on your project! Tier 4 projects are usually a minimum of 8 hours of work, but I'll let it slide this time :)
Parker
submitted USBC passkey for review ago
zsharpminor
requested changes for USBC passkey ago
Hi! You're missing your PCB source files (.kicadpro, .kicadsch, .kicad_pcb, or .epro). Please add those and add some more description to your README, thanks!
Parker
submitted USBC passkey for review ago
Parker
added to the journal ago
Fixed PCB DRC error and made github
I fixed my PCB design rule check errors
I also created my github with my readme, gerbers, BOM, and pick and place
I also have images attached to my github repo
Parker
added to the journal ago
Started Routing PCB
I started to route the pcb but I have 8 drc errors so I will continue to fix those.
Its very difficult due to the size of the board and the components.
Parker
added to the journal ago
Did research + Made Schematic
I made the schematic with all the components I found in my research
It also has pads for programming the device
Its a usbc passkey like a yubikey and other passkeys
Parker
started USBC passkey ago
1/1/2026 10:38 AM - Did research + Made Schematic
I made the schematic with all the components I found in my research
It also has pads for programming the device
Its a usbc passkey like a yubikey and other passkeys
1/1/2026 10:39 AM - Started Routing PCB
I started to route the pcb but I have 8 drc errors so I will continue to fix those.
Its very difficult due to the size of the board and the components.
1/1/2026 11 AM - Fixed PCB DRC error and made github
I fixed my PCB design rule check errors
I also created my github with my readme, gerbers, BOM, and pick and place
I also have images attached to my github repo