Arnav's Hackpad
Macropad for different purposes. I added 6 switches.
Created by
Arnav Rohilla
Hackpad
4 views
0 followers
Arnav Rohilla
added to the journal ago
Programable macropad with 6 switches.
My Programmable Macropad Project
I built a custom macropad to streamline repetitive tasks.
It uses a XIAO RP2040-DIP macro controller and mechanical switches, programmed with CircuitPython.
- Compact design with 3D-printed case
CAN ⚡🚀
approved Arnav's Hackpad ago
Nice hackpad
Arnav Rohilla
submitted Arnav's Hackpad for ship review ago
Shadow
requested changes for Arnav's Hackpad ago
hey! very cool project but you need to have an image of the assembled model with the 3d model of at least the PCB and if possible of switches and other components. and ideally you should have separate files of the top and bottom case of your hackpad
Arnav Rohilla
submitted Arnav's Hackpad for ship review ago
1mon ⚡
requested changes for Arnav's Hackpad ago
really cool hackpad! currently the switches on your pcb are too close together which will lead to the keycaps hitting eachother. please move them further apart! the outer white box is the spacing you should use (19.05mm)! please also upload the rest of your kicad files!
Arnav Rohilla
submitted Arnav's Hackpad for ship review ago
Arnav Rohilla
started Arnav's Hackpad ago
1/31/2026 - Programable macropad with 6 switches.
My Programmable Macropad Project
I built a custom macropad to streamline repetitive tasks.
It uses a XIAO RP2040-DIP macro controller and mechanical switches, programmed with CircuitPython.
- Compact design with 3D-printed case