Solas Sense Shamrock Lamp
Im making a small lamp with rgb leds and ldr. if the room is bright so will the leds and if the room is dim so are the leds
Created by
anadskman
Tier 4
4 views
0 followers
samliu ⚡🚀
approved Solas Sense Shamrock Lamp ago
Tier approved: 4
Grant approved: $33.00
This is great work and super cool! I'm excited to see how it'll turn out. Approved!
anadskman
submitted Solas Sense Shamrock Lamp for review ago
samliu ⚡🚀
requested changes for Solas Sense Shamrock Lamp ago
You're almost there, please make sure you include source files of your CAD. Check the submission guidelines (https://blueprint.hackclub.com/about/submission-guidelines).
anadskman
submitted Solas Sense Shamrock Lamp for review ago
Tanuki ⚡🚀
requested changes for Solas Sense Shamrock Lamp ago
Good work! I would appreciate it if you used global labels, this was a bit hard to follow. Sorry I that I didnt comment on this earlier, DM me this project and ill review it fast since this was my fault. Also, can you please add the PCB to the BOM? Thanks! Nice shape tho!
anadskman
submitted Solas Sense Shamrock Lamp for review ago
zsharpminor
requested changes for Solas Sense Shamrock Lamp ago
Hi, this is really cool, but you need a BOM.csv to be able to qualify for a grant, please read through submission guidelines and resubmit once you've got that! Thanks!
anadskman
submitted Solas Sense Shamrock Lamp for review ago
anadskman
added to the journal ago
Fixed mising gpio connection
I forgot to wire my Light Dependent Resistor to pin 2 so i had to updated the schematic and pcb.
Then i uploaded the new kicad files to my github page.
Tanuki ⚡🚀
requested changes for Solas Sense Shamrock Lamp ago
Hey! Your light pentiometer isn't wired correctly I believe. I think there should be another gpio sensor that can sense it, can you sanity check please? I think it should look like this: https://electrocredible.com/wp-content/uploads/2024/01/LDR-PICO-W-SCHEMATIC.webp
anadskman
submitted Solas Sense Shamrock Lamp for review ago
anadskman
added to the journal ago
Fixed PCB, Finished Cad, Made BOM/Github
I change the resistors to a bigger size.
Afterwards I downloaded the pcb as a step file and uploaded to fusion 360,
then I traced around the pcb a size bigger to make the case.
Lastly I Made up the BOM and Github.
anadskman
added to the journal ago
Made the Schematic, Routed PCB, Started CAD
I started by adding esp32-c3 supermini, 3 resistors per 1 rgb led, ldr + resistor.
I wired everything, assigned footprints, and Then I made up the pcb.
I had to make the edge.cuts design in fusion 360, export as step and convert into dxf and then... add to edge.cuts.
Lastly I place and routed everything.
anadskman
started Solas Sense Shamrock Lamp ago
1/6/2026 - Made the Schematic, Routed PCB, Started CAD
I started by adding esp32-c3 supermini, 3 resistors per 1 rgb led, ldr + resistor.
I wired everything, assigned footprints, and Then I made up the pcb.
I had to make the edge.cuts design in fusion 360, export as step and convert into dxf and then... add to edge.cuts.
Lastly I place and routed everything.
1/9/2026 - Fixed PCB, Finished Cad, Made BOM/Github
I change the resistors to a bigger size.
Afterwards I downloaded the pcb as a step file and uploaded to fusion 360,
then I traced around the pcb a size bigger to make the case.
Lastly I Made up the BOM and Github.
1/15/2026 - Fixed mising gpio connection
I forgot to wire my Light Dependent Resistor to pin 2 so i had to updated the schematic and pcb.
Then i uploaded the new kicad files to my github page.