ClockX -V1
ClockX V1 is a WiFi based clock with games,alarms etc. It displays date, time, year, day, month . It also has inbuilt games and alarm functions
Created by
Sasukeop159
Tier 4
12 views
2 followers
Sasukeop159
submitted ClockX -V1 for ship review ago
Sasukeop159
added to the journal ago
Completed the project
Today, I got my 3d parts so i inserted the heat inserts. After that i soldered tp4056 and boost module, secured them in place. I also done some other small changes in my code for improving the project. Finally now it is completed and this might be my last journal.
Sasukeop159
added to the journal ago
Soldered all parts in pcb
Today, i received my pcb from jlcpcb so i started soldering all the components onto the pcb. First, It was working fine but after i soldered the buzzer,Transistor and its resistor the esp suddenly crashed. I was panicked for a minute because the esp didnt reset and screen didnt work. I debugged for approx 1 hour and i finally found out that the buzzer was pulling the boot pin high during boot. After i removed those components it started working fine.
Sasukeop159
added to the journal ago
Uploaded Firmware and tested
Today, I received all of the components needed for my project except the pcb. So i uploaded the firmware to the wemos d1 mini. After that i used the pcb schematic to form a circuit using breadboard and breadboard wires. There were some problems too after fixing them it worked well and i have tested it with the lipo battery too.
alexren β‘π
approved ClockX -V1 ago
Tier approved: 4
Grant approved: $30.00
awesome project! you should send a video in #blueprint once its built!
Sunrit
gave kudos to ClockX -V1 ago
I think you should show the render of your device from either Fusion Teams Web or render from Fusion.
Sasukeop159
submitted ClockX -V1 for ship review ago
Souptik Samanta π
requested changes for ClockX -V1 ago
Could you please share a full-page screenshot of your JLCPCB orderβs shipping options , with the cheapest option selected? This will help us confirm that the lowest-cost shipping method has been chosen.
Apart from that, everything looks good.
Ping me when done!!
Sasukeop159
added to the journal ago
Change in the Grant needed
AS the shipping cost for 3d Print is bargained and reduced to 3 dollar from 6 dollar, The Grant which I want has been updated to 24 dollars. SO I Have updated BOM
Sasukeop159
submitted ClockX -V1 for ship review ago
Iamalive π
requested changes for ClockX -V1 ago
It loosk like you only have a .epro file for the pcb? Make sure to include the .pcb/.pro source file for the pcb! (same for cad, .f3d for fusion/an onshape link/whatever file type you used for cad).
Sasukeop159
added to the journal ago
Update in prices
Today when I checked the prices of pcbs in jlcpcb, The prices have been reduced due to end of chinese new year,so now the Grant I require has been changed to 29.34 dollar
Sasukeop159
submitted ClockX -V1 for ship review ago
Sasukeop159
added to the journal ago
Drew schematic, Routed pcb and created a 3d enclosure
DAY 5
Today, I started by creating a schematic for my pcb in easy eda and routed the pcb again and again until I felt it was fine. It took very long perfecting it and was satisfied of the routing the pcb finally.
After that, I started creating a enclosure for the pcb. It was also same like routing pcb. It took long to perfect it but not very much comparing to the pcb routing. Finally completed 3 works and I was satisfied very much of my work.
TIME SPENT- 3 HOUR 10 MINUTES
tty7
requested changes for ClockX -V1 ago
Hey! I love the project, and it seems really cool, but could you please add some cad? Read the submission guidelines for more detail. Can't wait to see what you create!
Sasukeop159
submitted ClockX -V1 for ship review ago
Shaurya Bisht
requested changes for ClockX -V1 ago
needs shipping options in cart screensnhots and also need images in the readme of design files. also need organized folder structure
Sasukeop159
submitted ClockX -V1 for ship review ago
Sasukeop159
added to the journal ago
Created BOM and changed circuit diagram
DAY 4
Today, There were several changes in my project. I changed the micro controller from esp8266 to wemos d1 mini because of its very small size. Because oh this i also was forced to create a new circuit diagram. i did it.
Also, I created the BOM of my project using excel. This might be the final journal of my project because my project is in final phase which is prototyping.
TIME SPENT: 2 hours
Sasukeop159
added to the journal ago
Completed coding the project
DAY 3
Today, I modified the code which i wrote yesterday. The code which i wrote yesterday was too
basic, So today i modified all the basic code to advanced which was pretty cool at first. After completing the code, I realized that the button management was too complex.
Due to the complexity of button handling i added a setting in menu which will display all the button handling. Also, The previous code only had clock, But today i added all the parts (games,settings,alarm). Like always had many errors which i fixed.
time spent: 3.45 Hour.
Sasukeop159
added to the journal ago
Started coding for the proect
DAY 2
Today, I started coding for my project's NTP clock part. Learnt basics ofu8g2, NTPClient and wrote this code. I had many syntax errors in my code. After compiling, Found 6 syntax errors which i fixed immediately.
My code had some declaration and software errors too which i also fixed and compiled again. This time, There were no errors and NTP CLOCK part was good to go. I completed 1 part out of the 3 parts of my project which are NTP clock, Game and ALARM.
TIME SPENT : Around 1 hour & 30 mins
Sasukeop159
added to the journal ago
Designed circuit diagram
DAY 1 
Today, I spent 1 hour and to choose components and complete my circuit diagram. I added all the components needed for the project and connected them. Finally i checked all the wiring and ensured that there were no mistakes in the wiring part.
Sasukeop159
added to the journal ago
Designed OLED UI
DAY 1
Today, I designed a good user interface for my OLED display using lopaka. It turned out very well. I also include options to use Clock and Game seperately. It took me 45 mins but UI was worth for spending the time.
Sasukeop159
started ClockX -V1 ago
1/7/2026 6 PM - Designed OLED UI
DAY 1
Today, I designed a good user interface for my OLED display using lopaka. It turned out very well. I also include options to use Clock and Game seperately. It took me 45 mins but UI was worth for spending the time.
1/7/2026 9 PM - Designed circuit diagram
DAY 1
Today, I spent 1 hour and to choose components and complete my circuit diagram. I added all the components needed for the project and connected them. Finally i checked all the wiring and ensured that there were no mistakes in the wiring part.
1/8/2026 - Started coding for the proect
DAY 2
Today, I started coding for my project's NTP clock part. Learnt basics ofu8g2, NTPClient and wrote this code. I had many syntax errors in my code. After compiling, Found 6 syntax errors which i fixed immediately.
My code had some declaration and software errors too which i also fixed and compiled again. This time, There were no errors and NTP CLOCK part was good to go. I completed 1 part out of the 3 parts of my project which are NTP clock, Game and ALARM.
TIME SPENT : Around 1 hour & 30 mins
1/9/2026 - Completed coding the project
DAY 3
Today, I modified the code which i wrote yesterday. The code which i wrote yesterday was too
basic, So today i modified all the basic code to advanced which was pretty cool at first. After completing the code, I realized that the button management was too complex.
Due to the complexity of button handling i added a setting in menu which will display all the button handling. Also, The previous code only had clock, But today i added all the parts (games,settings,alarm). Like always had many errors which i fixed.
time spent: 3.45 Hour.
1/11/2026 - Created BOM and changed circuit diagram
DAY 4
Today, There were several changes in my project. I changed the micro controller from esp8266 to wemos d1 mini because of its very small size. Because oh this i also was forced to create a new circuit diagram. i did it.
Also, I created the BOM of my project using excel. This might be the final journal of my project because my project is in final phase which is prototyping.
TIME SPENT: 2 hours
2/15/2026 - Drew schematic, Routed pcb and created a 3d enclosure
DAY 5
Today, I started by creating a schematic for my pcb in easy eda and routed the pcb again and again until I felt it was fine. It took very long perfecting it and was satisfied of the routing the pcb finally.
After that, I started creating a enclosure for the pcb. It was also same like routing pcb. It took long to perfect it but not very much comparing to the pcb routing. Finally completed 3 works and I was satisfied very much of my work.
TIME SPENT- 3 HOUR 10 MINUTES
2/24/2026 - Update in prices
Today when I checked the prices of pcbs in jlcpcb, The prices have been reduced due to end of chinese new year,so now the Grant I require has been changed to 29.34 dollar
3/1/2026 - Change in the Grant needed
AS the shipping cost for 3d Print is bargained and reduced to 3 dollar from 6 dollar, The Grant which I want has been updated to 24 dollars. SO I Have updated BOM
3/14/2026 - Uploaded Firmware and tested
Today, I received all of the components needed for my project except the pcb. So i uploaded the firmware to the wemos d1 mini. After that i used the pcb schematic to form a circuit using breadboard and breadboard wires. There were some problems too after fixing them it worked well and i have tested it with the lipo battery too.
3/18/2026 - Soldered all parts in pcb
Today, i received my pcb from jlcpcb so i started soldering all the components onto the pcb. First, It was working fine but after i soldered the buzzer,Transistor and its resistor the esp suddenly crashed. I was panicked for a minute because the esp didnt reset and screen didnt work. I debugged for approx 1 hour and i finally found out that the buzzer was pulling the boot pin high during boot. After i removed those components it started working fine.
3/31/2026 - Completed the project
Today, I got my 3d parts so i inserted the heat inserts. After that i soldered tp4056 and boost module, secured them in place. I also done some other small changes in my code for improving the project. Finally now it is completed and this might be my last journal.