Tanuki ⚡🚀
requested changes for Krackboard ago
Hey! The schematic seems to be a 1:1 copy of the tutorial from the journal. The readme has extra stuff, but the changes should be journaled! I can't see the reciever in the journal. Please check out https://blueprint.hackclub.com/about/submission-guidelines, and ping me if you have any questions in #blueprint-drafts! Remember, all changes should be in the journal :)
speedhawks
submitted Krackboard for ship review ago
Iamalive 🚀
requested changes for Krackboard ago
Thanks for listening to previous feedback! If you could just add your shipping option for your pcb in your cart screenshots that'd be great :D
speedhawks
submitted Krackboard for ship review ago
1mon ⚡
requested changes for Krackboard ago
user request
speedhawks
submitted Krackboard for ship review ago
speedhawks
added to the journal ago
Added IR Receiver
As @zsharpminor said to add something more , so i decided to go with a IR receiver. so now I have a rgb and a IR receiver to tinkle with. I am very curious about the instant design review lol <3
zsharpminor ⚡
requested changes for Krackboard ago
Hi, this appears to be a pretty direct copy of the tutorial, please try to add one or two things (temperature sensor, to name only one example) to differentiate yourself. Additionally, please use Economic PCBA instead of Standard PCBA. Thanks.
speedhawks
submitted Krackboard for ship review ago
speedhawks
added to the journal ago
Finished with the pcb
I am back after exams , added some silkscreen and also added a rgb to it , now i will write the firmware for it ig , It was fun learning how every component works.
speedhawks
added to the journal ago
Routed the PCB
Its the next day , I sat at around 7:30am started to route the pcb before going to college. I closely followed the tutorial and I tried my best to exactly replicated the routing like kai. I did face some issues like with the same track length for the D+ and D-, but then got it right. I just need to add some cool silkscreen to it.
speedhawks
added to the journal ago
Done with the final schematics
I am so happy!! , The guide is very helpful , i also corrected all the mistakes that he told.
It took almost 1hr , i was a bit lazy though. I will do the pcb tomorrow.
speedhawks
added to the journal ago
Done with the basic schematics
Hey guys this is my first time making a more complex project , i am following the tutorial on the website , so far i am done with this basic schematics, like placing the RP2040 and the decoupling capacitors
speedhawks
started Krackboard ago
1/8/2026 9 PM - Done with the basic schematics
Hey guys this is my first time making a more complex project , i am following the tutorial on the website , so far i am done with this basic schematics, like placing the RP2040 and the decoupling capacitors
1/8/2026 10 PM - Done with the final schematics
I am so happy!! , The guide is very helpful , i also corrected all the mistakes that he told.
It took almost 1hr , i was a bit lazy though. I will do the pcb tomorrow.
1/9/2026 - Routed the PCB
Its the next day , I sat at around 7:30am started to route the pcb before going to college. I closely followed the tutorial and I tried my best to exactly replicated the routing like kai. I did face some issues like with the same track length for the D+ and D-, but then got it right. I just need to add some cool silkscreen to it.
1/14/2026 - Finished with the pcb
I am back after exams , added some silkscreen and also added a rgb to it , now i will write the firmware for it ig , It was fun learning how every component works.
1/15/2026 - Added IR Receiver
As @zsharpminor said to add something more , so i decided to go with a IR receiver. so now I have a rgb and a IR receiver to tinkle with. I am very curious about the instant design review lol <3