willgob
added to the journal ago
Change of mind
Accually, i changed to doing the custom PCB again its still kinda tricky but i think i can pull through rn i have just finished routing the flash storage or smthing.
willgob
added to the journal ago
Deleted most of my work :(
I just relised i could put a normal rasberry pi pico 2w instead of making my own. Did waste some time but i am happy that i realised it cause it saved me a headache of soldering later down the line.
willgob
added to the journal ago
Added most of pico dev board
I am using the make ur dev board tutorial i have done most of the things all that is left are the pinouts and the acually layout of the pico i am wondering if i can have two usbs one usb female and one usb male
willgob
added to the journal ago
REcieved Feedback
The reviewer said i have to make it better so i want to embed a rp2040/2350 and overall make it better than ever I will now make it better :) good luck to me!
Tanuki ⚡🚀
requested changes for PCB Ruler ago
I like this concept :D I would really like to see more design into it tho. It is currently just a pcb with a silkscreen. This currently funcitons like a piece of paper on cardboard :( You will have to actually make this an actual PCB. If u just want something to act like a ruler, prob get a ruler. This really reminds me of a DigiKey ruler tho lol.
willgob
submitted PCB Ruler for review ago
nimit 🚀
requested changes for PCB Ruler ago
Your README is lacking. Please add the BOM (in your case it's only the PCB) and some screenshots. Your project also doesn't have a explanation. Try to mention what each part of the ruler does.
willgob
submitted PCB Ruler for review ago
technical_.
requested changes for PCB Ruler ago
There is still little to no description about your project, why you made it and some processes taken. Please expand on it heavily.
Pictures are a great way to provide more context, and fully flesh out your design process!
A good example of what an acceptable read.me is linked below.
https://github.com/KaiPereira/PR1SM
Do not just add one more sentence and call it a day.
willgob
submitted PCB Ruler for review ago
technical_.
requested changes for PCB Ruler ago
Please expand on your Read.ME. There is little to no description about your project and why you made it. If you need a reminder on what is considered a proper submission, please refer to https://blueprint.hackclub.com/docs/submission-guidelines
Your cart should show the full list of items, not just the cost. This is to verify that there is no fraud, and you are not ordering unrelated items.
willgob
submitted PCB Ruler for review ago
willgob
added to the journal ago
Finished
Finished :) done all the silkscreen and now ready to ship L) its a ruler with important info for hackers like me its cool and its my first project for blueprint
willgob
added to the journal ago
Started the pcb
created pcb and started on the silkscreen this is a starter project that is used to get used to blueprint and just i wanted to have fun and not kill my brain :)
willgob
started PCB Ruler ago
10/24/2025 - Started the pcb
created pcb and started on the silkscreen this is a starter project that is used to get used to blueprint and just i wanted to have fun and not kill my brain :)
10/25/2025 - Finished
Finished :) done all the silkscreen and now ready to ship L) its a ruler with important info for hackers like me its cool and its my first project for blueprint
10/26/2025 8 PM - REcieved Feedback
The reviewer said i have to make it better so i want to embed a rp2040/2350 and overall make it better than ever I will now make it better :) good luck to me!
10/26/2025 9 PM - Added most of pico dev board
I am using the make ur dev board tutorial i have done most of the things all that is left are the pinouts and the acually layout of the pico i am wondering if i can have two usbs one usb female and one usb male
10/27/2025 7 PM - Deleted most of my work :(
I just relised i could put a normal rasberry pi pico 2w instead of making my own. Did waste some time but i am happy that i realised it cause it saved me a headache of soldering later down the line.
10/27/2025 8 PM - Change of mind
Accually, i changed to doing the custom PCB again its still kinda tricky but i think i can pull through rn i have just finished routing the flash storage or smthing.