Blueprint

Sivasankar's Hackpad

My personal hackpad for cadding using fusion 360 built using easyeda with cool features likie ntp clock

Created by Sasukeop159 Sasukeop159

Hackpad

6 views

0 followers

View Repository View Demo

Sasukeop159 Sasukeop159 submitted Sivasankar's Hackpad for ship review ago

Sasukeop159 Sasukeop159 added to the journal ago

Flashed the firmware

WhatsApp Image 2026-03-21 at 16.56.17
imageAfter i finished soldering all components in place i started trying to flash the firmware in xiao rp2040. It was very hard for setup of xiao rp2040.There were many errors in firmware and from hardware but i finally fixed them. After that i tested the hackpad which turned out to work fine.

Sasukeop159 Sasukeop159 added to the journal ago

Soldered components

WhatsApp Image 2026-03-21 at 14.35.15Today, I received the kit from hackclub. I already received my pcbs from jlcpcb days ago so i tested the pcb if all routing were correct and soldered all components in place.

CAN CAN ⚡🚀 approved Sivasankar's Hackpad ago

Nice hackpad

Sasukeop159 Sasukeop159 submitted Sivasankar's Hackpad for ship review ago

Sasukeop159 Sasukeop159 started Sivasankar's Hackpad ago

3/21/2026 2 PM - Soldered components

WhatsApp Image 2026-03-21 at 14.35.15Today, I received the kit from hackclub. I already received my pcbs from jlcpcb days ago so i tested the pcb if all routing were correct and soldered all components in place.

3/21/2026 4 PM - Flashed the firmware

WhatsApp Image 2026-03-21 at 16.56.17
imageAfter i finished soldering all components in place i started trying to flash the firmware in xiao rp2040. It was very hard for setup of xiao rp2040.There were many errors in firmware and from hardware but i finally fixed them. After that i tested the hackpad which turned out to work fine.