Modulable 3d printable rc plane base

i want to make an easy base for rc plane wich is capable of all type of flight (trainer, sport and 3d)

Breath

Dispositif de gestion de l'aération de la maison 100% autonome et connecté

Éco'Light

Éco'Light is a smart, touchless light switch that replaces a standard wall switch. Instead of pressing a button, you just wave your hand in front of an ultrasonic sensor to toggle the light. It also reads the ambient brightness — if the room is already bright enough, it won't turn on. Everything is controllable remotely from a web dashboard, with extra modes like a wake-up alarm, a party strobe effect, and a burglary alert. Setup is done via a phone app over Bluetooth. The whole thing runs on an ESP32, fits in a 3D-printed enclosure.

Z-Axis : FPV flight controller with head tracking and ESC

It is a custom flight controller designed for FPV airplanes, integrating a 3-axis head-tracking servo system, an ESC and top tier IMU ans MCU directly on the main PCB to create the perfect flight controller for everyone (glider, warbird, trainer, 3d...)

SmartLine : Système de détection IR pour terrain de tennis et badminton

Objective: To replace expensive camera tracking systems (e.g., Hawk-Eye) by automatically detecting whether a ball is “in” or “out” on a tennis or badminton court in ambiguous situations near the lines. Principle: Two infrared transmitters are deployed on either side of the court boundary line. Each laser module is symmetrical with a transmitter and a receiver. If a ball crosses the beam: if it crosses the beam outside the line, the system detects “Out”; if it crosses the beam inside the line, the system detects “In.” I think I will optimize the whole thing with, most likely, lenses on the IR LED and a tube that reduces interference from ambient light. The other components are: an ESP32 S3 Supermini, and then I can potentially add a 0.96" OLED screen, a solar panel to be energy self-sufficient coupled with a battery, and add a score management and display system with perhaps a centralized interface such as a television connected to all my small modules. I can also add connectivity thanks to the integrated Bluetooth and Wi-Fi on the ESP32 S3 and a small visible laser to align the modules with each other.