Light Switch Covers

Three custom 3D-printed light switch covers with industrial designs, including CAUTION, WARNING, and POWER CONTROL.

Hack Club Posters LED Light Bar

This project is a 3D design for a component that holds an LED strip at an upward angle to illuminate Hack Club posters on my wall. It can be 99 cm long (three parts) or 66 cm long (two parts), depending on which wall I need it for.

TF Luna Security System

This project is an evolution of my arduino-security-system. It uses a TF-Luna lidar to detect when someone passes through my bedroom door and then, it triggers an ESP-CAM to take a picture. This picture is then sent to an application (Home Assistant or similar) using the ESP's Wi-Fi. It will even recognize if the person in the picture is me or not. The project will have a PCB and custom 3D printed case.

Odins Eye

Odin's eye is a DIY speed camera. It uses a TF-Luna lidar to detect passing vehicles and their speed, which triggers the raspi camera module 3 to take a picture of the vehicle which is analyzed by a pi zero 2w. From the picture it gets the vehicle and in the case of it being a car, its license plate. Then using the pi's wifi it sends the data to your phone.