pcb done

PCB log

So i firstly made the outline and placed the parts and when it got to routing i was to lazy to route my self so insted i used auto route which i blive did a very good job i also like how the size of the pcb its just right for your pocket to have it on the go

schematic DONE

first i did the full schematic but i forgot to save so i had to redo it all over
heres what i have done
i add the buttons a boot and reset
i add voltage regulator i picked the XC6206P332MR-G which is in the guide
i add a Usb Male and usb c male

now am onto routing it

schematic

following the hacker key guide and so far am working on my schematic i have add the RP2040 chip and W25Q128JVSIQ and the X322512MSB4SI but i need to take a break so heres my schematic! next i need to add some decoupling capacitors and then added some buttons and also need to add a voltage regulator and a usb socket i also want to add USB-c then i have todo pcb